From: Tomi Manninen Subject: Re: newbie soundmodem question about mic vs line input Date: Fri, 13 Feb 2004 20:39:34 +0200 Sender: linux-hams-owner@vger.kernel.org Message-ID: <1076697574.1290.50.camel@oh2bns.ampr.org> References: <20040213100203.62bbe780.washer@trlp.com> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20040213100203.62bbe780.washer@trlp.com> List-Id: Content-Type: text/plain; charset="us-ascii" To: Linux-hams List Hi, > 1) Under linux, are the mic and line inputs mixed, or do they > have seperate devices to open? It's one device, with the input (recording) device selected by ioctls. > 2) I can play with the mic/line/speaker/etc gains using aumix.. > Does this have any effect on soundmodem, or does it set the gain > using ioctls, etc. Soundmodem does not touch the sound card mixer settings nor does it change the input selection. These must be set with a regular mixer application. I use gmix. > 3) The mic jack appears to be mono, where as the line jack appears > to be stereo. Does soundmodem have any options to listen to the two > channels seperately? i.e. I'd like to do APRS on one channel, > and packet on another, but I fear that /dev/dsp is a mix. Is this > correct? Whether recording is stereo or mono (usually mono == left channel) is again selected with ioctls. Soundmodem sets the device for mono input and output. -- Tomi Manninen / OH2BNS / KP20ME04