From: Simon Schampijer Subject: Re: Firewire 410 Date: 09 Mar 2004 19:44:59 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <1078857898.19902.39.camel@licorne.ircam.fr> References: <200403091832.i29IWEPO027305@dhin.linuxaudiosystems.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: <200403091832.i29IWEPO027305@dhin.linuxaudiosystems.com> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Paul Davis Cc: Takashi Iwai , alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Le mar 09/03/2004 =C3=A0 19:32, Paul Davis a =C3=A9crit : > >At 05 Mar 2004 11:23:35 +0100, > >Simon Schampijer wrote: > >>=20 > >> Hello, > >> I've got a Maudio Firewire 410. > >> Are you going to make also drivers > >> for this one ? > > > >so far, no ALSA developer works on it. > > > >> Or are there Problems with > >> Maudio or firewire??? > > > >unfortunately, no hardware, no datasheet, no time... >=20 > when i talked with m-audio at NAMM, they claim that their firewire > interface(s) will be "class compliant". on os-x, for example, there is > no m-audio firewire driver, just one for the relevant standard for > audio/midi over 1394. FWIW, Event/Echo and Apogee both said the same > thing. >=20 Hi, I have tried to use the m-audio with the iec61883 jack driver. After doing some test, I have found that I can have some noise only after an hot reboot of my powerbook (Mac OS X to Yellowdog Linux) with the card plugged. The strange thing is with hot reboot the card does not appear in /proc/bus/firewire (I haven't the laptop here to check). With a cold boot or an unplug/plug the card appears in /proc/bus/firewire but I haven't succesfully made any noise with this card. So perhaps there is a firmware uploading in Mac OS X like the RME Multiface. Tell me if you need more informations. Thanks a lot for your help, best regards, Simon. ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click