From: gte654n@mail.gatech.edu Subject: snd_intel8x0 fails after ACPI sleep Date: Thu, 11 Mar 2004 02:13:14 -0500 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <1078989194.4050118a9a0df@webmail.mail.gatech.edu> References: <1078928193.18054.247.camel@renegade> <404F62B1.30206@superbug.demon.co.uk> <1078982128.1838.72.camel@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: <1078982128.1838.72.camel@localhost> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org I have a Fujitsu E7110 laptop with a builtin audio card. This is what ls= pci=20 reports...=20 =20 00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio = (rev=20 02)=20 Subsystem: Citicorp TTI: Unknown device 1177=20 Flags: bus master, medium devsel, latency 0, IRQ 11=20 I/O ports at 1000 [size=3D256]=20 I/O ports at 1880 [size=3D64]=20 =20 I am running 2.6.4-rc2 kernel, and I have been trying to get ACPI S3 (sus= pend=20 to ram) to wake up correctly. One of the problems that I am encountering= is=20 that with the sound modules loaded (I have always had success with=20 snd_intel8x0 on the same hardware) coming back from sleep freezes my lapt= op=20 hard. If I rmmod *all* the sound-related modules before going to sleep, = the=20 laptop resumes without a hitch. However, if I attempt to modprobe=20 snd_intel8x0 after resume, I get a hard freeze again. I cannot recover a= ny=20 debug output, because the end of /var/log/messages is garbled on reboot.=20 =20 I have looked on ALSA and ACPI mailing lists and have not been able to fi= nd a=20 satisfactory answer to this. It appears some people can reinsert the int= el=20 driver after resume, and they get their audio back. I have no such luck.= =20 =20 Could you please provide some tips on how I can help address this problem= ? =20 For instance, what other information about my setup should I post. Is th= ere=20 some documentation on audio power management under ACPI that I am overloo= king? =20 =20 Thank you very much, =20 =20 Ilya=20 =20 ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click