From: favero@grad.ufsc.br Date: Fri, 27 Aug 2004 03:57:40 +0000 Subject: Re: [LARTC] Re: [LARTC] RE: [LARTC] Load Balance sim=?ISO-8859-1?Q?ply_doesn=B4t_work...?= Message-Id: <1093579060.412eb134b72a2@webmail.grad.ufsc.br> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org > >=20 > > ip route add default scope global nexthop via $P1 dev=20 $IF1 weight 1 \ > > nexthop via $P2 dev $IF2 weight 1 > >=20 >=20 > This multipath routing command keep coming up as classic=20 > way to perform multipath routing for NAT access, which I=20 > considered it as VERY misleading. >=20 > It should only be used if you are NOT using NAT. You mean that using NAT its impossible to do load balance or=20 this is the worng command? If its the wrong command, what=B4s=20 the right one? Tks A LOT for the response! Fernando Favero _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/