From: Jason Opperisano Subject: Re: Question about limited primary addresses Date: Tue, 21 Sep 2004 15:21:22 -0400 Sender: netfilter-bounces@lists.netfilter.org Message-ID: <1095794481.1897.39.camel@wolfpack.ljm.dom> References: <414E5004.1060009@rocksteady.com> <1095687787.1898.20.camel@wolfpack.ljm.dom> <41507815.8080008@rocksteady.com> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <41507815.8080008@rocksteady.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: netfilter-bounces@lists.netfilter.org Content-Type: text/plain; charset="us-ascii" To: netfilter@lists.netfilter.org On Tue, 2004-09-21 at 14:51, Patrick Turley wrote: > I adjusted your script very slightly to put all the addresses in the > 10/8 subnet: > > > i=1 > function addIP() { > j=0 > while [ $j -le 255 ]; do > sudo ip addr add 10.$1.$j.1/24 dev eth0 > let "j = $j + 1" > done > } > > while [ $i -le 2 ]; do > addIP $i > let "i = $i + 1" > done > > > When I ran this version, I saw the very same failure I've been seeing > all along. > > Would it be possible for you to run the modified version of this script > on your machine and see if you have any problem? > > Thanks again for your time. not trying to complicate things, but i had to test this on a diff machine (same HW, but running gentoo instead of FC1--can't blow up my laptop right this moment). details: # uname -a Linux vmg2 2.4.26-gentoo-r9 #2 Fri Sep 3 07:13:35 EDT 2004 i686 Intel(R) Pentium(R) 4 CPU 2.20GHz GenuineIntel GNU/Linux # ip -4 add sh eth0 | wc -l 513 # ip -4 add sh eth0 | head 2: eth0: mtu 1500 qdisc pfifo_fast qlen 1000 inet 10.1.0.1/24 scope global eth0 inet 10.1.1.1/24 scope global eth0 inet 10.1.2.1/24 scope global eth0 inet 10.1.3.1/24 scope global eth0 inet 10.1.4.1/24 scope global eth0 inet 10.1.5.1/24 scope global eth0 inet 10.1.6.1/24 scope global eth0 inet 10.1.7.1/24 scope global eth0 inet 10.1.8.1/24 scope global eth0 # ip -4 add sh eth0 | tail inet 10.2.246.1/24 scope global eth0 inet 10.2.247.1/24 scope global eth0 inet 10.2.248.1/24 scope global eth0 inet 10.2.249.1/24 scope global eth0 inet 10.2.250.1/24 scope global eth0 inet 10.2.251.1/24 scope global eth0 inet 10.2.252.1/24 scope global eth0 inet 10.2.253.1/24 scope global eth0 inet 10.2.254.1/24 scope global eth0 inet 10.2.255.1/24 scope global eth0 from a machine assigned 10.1.1.100/16 and 10.2.1.100/16, i can ping: 10.1.0.1, 10.1.1.1, 10.1.2.1, 10.1.3.1, 10.1.4.1, 10.2.254.1, 10.2.25.1, 10.1.25.1, 10.2.255.1 ...on the test machine with all the 10.[1-2].[0-255].1/24 addresses. we might be going about this all wrong...are you sure the problem is the linux box with all the IP's, and not something else? perhaps you're overflowing the MAC table of a connected switch (just a thought)? -j -- Jason Opperisano