From: grave Date: Fri, 18 Mar 2005 16:51:09 +0000 Subject: =?iso-8859-1?b?UmWgOg==?= [U-Boot-Users] booting uboot from flash on a memec evaluation board In-Reply-To: <20050318163110.40A55C1510@atlas.denx.de> (from wd@denx.de on Fri Mar 18 17:31:05 2005) References: <20050318163110.40A55C1510@atlas.denx.de> Message-ID: <1111164669l.12024l.4l@ipnnarval> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Le 18.03.2005 17:31:05, Wolfgang Denk a ?crit?: > In message <1111149539l.12024l.3l@ipnnarval> you wrote: > > > > Do I need a specific and very simple code at address 0xfffffffc that > > > jump to the flash address where there is the uboot code ? > > Yes - typically a branch instruction. Thanks, but the branch instruction only (as far as I understand) support 24 bits address jump and there is only room for one instruction in 0xfffffffc. So I tryed to set a jump to 0xffff8000 where there is some code that store a 32 bits address in the link register before trying a jump and it didn't work. Can you send me an example please ? xavier