Received: with ECARTIS (v1.0.0; list linux-mips); Tue, 28 Jun 2005 14:48:11 +0100 (BST) Received: from clock-tower.bc.nu ([IPv6:::ffff:81.2.110.250]:54999 "EHLO lxorguk.ukuu.org.uk") by linux-mips.org with ESMTP id ; Tue, 28 Jun 2005 14:47:44 +0100 Received: from localhost.localdomain (localhost.localdomain [127.0.0.1]) by lxorguk.ukuu.org.uk (8.12.11/8.12.11) with ESMTP id j5SDifku000534; Tue, 28 Jun 2005 14:44:41 +0100 Received: (from alan@localhost) by localhost.localdomain (8.12.11/8.12.11/Submit) id j5SDifcq000533; Tue, 28 Jun 2005 14:44:41 +0100 X-Authentication-Warning: localhost.localdomain: alan set sender to alan@lxorguk.ukuu.org.uk using -f Subject: Re: can't find interrupt number under /proc/interrupts for the pci multi-port on db1550 From: Alan Cox To: rolf liu Cc: linux-mips@linux-mips.org In-Reply-To: <2db32b720506271706201a66fb@mail.gmail.com> References: <2db32b720506271706201a66fb@mail.gmail.com> Content-Type: text/plain Content-Transfer-Encoding: 7bit Message-Id: <1119966279.32381.7.camel@localhost.localdomain> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.4.6 (1.4.6-2) Date: Tue, 28 Jun 2005 14:44:39 +0100 Return-Path: X-Envelope-To: <"|/home/ecartis/ecartis -s linux-mips"> (uid 0) X-Orcpt: rfc822;linux-mips@linux-mips.org Original-Recipient: rfc822;linux-mips@linux-mips.org X-archive-position: 8230 X-ecartis-version: Ecartis v1.0.0 Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org X-original-sender: alan@lxorguk.ukuu.org.uk Precedence: bulk X-list: linux-mips On Maw, 2005-06-28 at 01:06, rolf liu wrote: > I am running 2.4.31 on db1550 with a pci multi-port board. the kernel > starts up ok. but after start-up, I can't find the corresponding > interrupt number for this board, which is irq 2. I can find the device > under /proc/devices and /proc/tty/driver, etc. So I am now sure if it > is working ok. Is there good (simple) method to test this serial port? Do something like cat /dev/ttySwhatever then look at the IRQ list. The interrupt will only be allocated while the port is in use.