From: terry qiu Date: Fri, 17 Feb 2006 12:40:13 +0800 Subject: [U-Boot-Users] IDE device configure Message-ID: <1140151213.3162.26.camel@localhost.localdomain> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello all, I have supported the IDE Hard disk and the CF card on my custom board in U-BOOT. They are using the same IDE bus. If the hard disk and CF card are both inserted to the board, they are working well.But if I only insert the CF card, it can't be found. The issue seems like is the configuration of the device master/slave, how to configure which device as a master or as a slave? Best regards Terry