From: DENX Support System Date: Thu, 2 Nov 2006 10:30:02 +0100 Subject: [U-Boot-Users] [DNX#2006110242000038] [PATCH 01/10 v3]: General code modi [...] Message-ID: <1162459802.22346.7056543969@castor.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006110242000038] was created: > General code modification for mpc7448hpc2 board support. > > 1. Add 7447A and 7448 processor support. > 2. Add the following flags. > > CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured > dynamically (such as by switch on board), this flag should be set. > > CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot > relocates to RAM, this flag should be set > > CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the > system hang in exception, this flag should be set > > There is a design issue for tsi108/109 pci configure read. When pci scan > the slots, if there is no pci card, the tsi108/9 will cause a machine > check exception for mpc7448 processor. > > Signed-off-by: Alexandre Bounine > Signed-off-by: Roy Zang > --- > MAKEALL | 4 +-- > Makefile | 3 ++ > README | 22 ++++++++-------- > cpu/74xx_7xx/cpu.c | 54 > +++++++++++++++++++++++++++++++++++++--- > cpu/74xx_7xx/cpu_init.c | 2 + > cpu/74xx_7xx/speed.c | 55 > ++++++++++++++++++++++++++++++++++++++--- > drivers/Makefile | 6 ++-- > include/74xx_7xx.h | 1 + > include/asm-ppc/global_data.h | 3 ++ > lib_ppc/extable.c | 10 +++++++ > 10 files changed, 136 insertions(+), 24 deletions(-) > > diff --git a/MAKEALL b/MAKEALL > index 879a17f..812c006 100755 > --- a/MAKEALL > +++ b/MAKEALL > @@ -150,8 +150,8 @@ ## 74xx/7xx Systems > ######################################################################### > > LIST_74xx=" \ > - DB64360 DB64460 EVB64260 P3G4 \ > - PCIPPC2 PCIPPC6 ZUMA \ > + DB64360 DB64460 EVB64260 mpc7448hpc2 \ > + P3G4 PCIPPC2 PCIPPC6 ZUMA \ > " > > LIST_7xx=" \ > diff --git a/Makefile b/Makefile > index 62dafc5..e2fb6fd 100644 > --- a/Makefile > +++ b/Makefile > @@ -1718,6 +1718,9 @@ EVB64260_config \ > EVB64260_750CX_config: unconfig > @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260 > > +mpc7448hpc2_config: unconfig > + @./mkconfig $(@:_config=) ppc 74xx_7xx mpc7448hpc2 > + > P3G4_config: unconfig > @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 > > diff --git a/README b/README > index b78ea61..aa17e46 100644 > --- a/README > +++ b/README > @@ -2312,17 +2312,17 @@ configurations; the following names are > csb272_config lwmon_config sbc8260_config > CU824_config MBX860T_config sbc8560_33_config > DUET_ADS_config MBX_config sbc8560_66_config > - EBONY_config MPC8260ADS_config SM850_config > - ELPT860_config MPC8540ADS_config SPD823TS_config > - ESTEEM192E_config MPC8540EVAL_config stxgp3_config > - ETX094_config MPC8560ADS_config SXNI855T_config > - FADS823_config NETVIA_config TQM823L_config > - FADS850SAR_config omap1510inn_config TQM850L_config > - FADS860T_config omap1610h2_config TQM855L_config > - FPS850L_config omap1610inn_config TQM860L_config > - omap5912osk_config walnut_config > - omap2420h4_config Yukon8220_config > - ZPC1900_config > + EBONY_config mpc7448hpc2_config SM850_config > + ELPT860_config MPC8260ADS_config SPD823TS_config > + ESTEEM192E_config MPC8540ADS_config stxgp3_config > + ETX094_config MPC8540EVAL_config SXNI855T_config > + FADS823_config NMPC8560ADS_config TQM823L_config > + FADS850SAR_config NETVIA_config TQM850L_config > + FADS860T_config omap1510inn_config TQM855L_config > + FPS850L_config omap1610h2_config TQM860L_config > + omap1610inn_config walnut_config > + omap5912osk_config Yukon8220_config > + omap2420h4_config ZPC1900_config > > Note: for some board special configuration names may exist; check if > additional information is available from the board vendor; for > diff --git a/cpu/74xx_7xx/cpu.c b/cpu/74xx_7xx/cpu.c > index ca45e17..c3aadca 100644 > --- a/cpu/74xx_7xx/cpu.c Your U-Boot support team