Return-Path: Received: from sandbox.secretlab.ca (S01060016b61d1226.cg.shawcable.net [68.147.191.145]) by ozlabs.org (Postfix) with ESMTP id 5E99F67BEC for ; Tue, 7 Nov 2006 11:34:40 +1100 (EST) From: Grant Likely To: Sylvain Munaut , linuxppc-dev@ozlabs.org, Benjamin Herrenschmidt , nd@bplan-gmbh.de Subject: [PATCH 1/5] Add Lite5200B device tree Date: Mon, 6 Nov 2006 17:34:21 -0700 Message-Id: <11628596751096-git-send-email-grant.likely@secretlab.ca> In-Reply-To: <11628596653052-git-send-email-grant.likely@secretlab.ca> References: <11628596653052-git-send-email-grant.likely@secretlab.ca> List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Signed-off-by: Grant Likely --- arch/powerpc/boot/dts/lite5200b.dts | 275 +++++++++++++++++++++++++++++++++++ 1 files changed, 275 insertions(+), 0 deletions(-) diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts new file mode 100644 index 0000000..eff10b7 --- /dev/null +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -0,0 +1,275 @@ +/* + * Lite5200b board Device Tree Source + * + * Copyright 2006 Secret Lab Technologies Ltd. + * Grant Likely + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "Lite5200b"; + compatible = "mpc5200b\0mpc52xx"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; + i-cache-line-size = <20>; + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 10000000>; // 256MB + }; + + soc5200@f0000000 { + #interrupt-cells = <3>; + device_type = "soc"; + ranges = <0 f0000000 f0010000>; + reg = ; + bus-frequency = <0>; // from bootloader + + pic@500 { + // 5200 interrupts are encoded into two levels; + // Level 1 is 2 bits; [CRIT=0,MAIN=1,PERF=2,SDMA=3] + // Level 2 is 6 bits + // The levels are encoded into the lower byte of + // a single cell; // in binary: 1122 2222 + linux,phandle = <500>; + interrupt-controller; + #interrupt-cells = <3>; + device_type = "interrupt-controller"; + compatible = "mpc5200b-pic\0mpc5200-pic\0mpc52xx-pic"; + reg = <500 80>; + built-in; + }; + + gpt@600 { // General Purpose Timer + compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <600 10>; + interrupts = <1 9 2>; + interrupt-parent = <500>; + }; + + gpt@610 { // General Purpose Timer + compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <610 10>; + interrupts = <1 a 2>; + interrupt-parent = <500>; + }; + + gpt@620 { // General Purpose Timer + compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <620 10>; + interrupts = <1 b 2>; + interrupt-parent = <500>; + }; + + gpt@630 { // General Purpose Timer + compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <630 10>; + interrupts = <1 c 2>; + interrupt-parent = <500>; + }; + + gpt@640 { // General Purpose Timer + compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <640 10>; + interrupts = <1 d 2>; + interrupt-parent = <500>; + }; + + gpt@650 { // General Purpose Timer + compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <650 10>; + interrupts = <1 e 2>; + interrupt-parent = <500>; + }; + + gpt@660 { // General Purpose Timer + compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <660 10>; + interrupts = <1 f 2>; + interrupt-parent = <500>; + }; + + gpt@670 { // General Purpose Timer + compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <670 10>; + interrupts = <1 10 2>; + interrupt-parent = <500>; + }; + + rtc@800 { // Real time clock + compatible = "mpc5200b-rtc\0mpc52xx-rtc"; + device_type = "rtc"; + reg = <800 100>; + interrupts = <1 5 2 1 6 2>; + interrupt-parent = <500>; + }; + + mscan@900 { + device_type = "mscan"; + compatible = "mpc5200b-mscan\0mpc52xx-mscan"; + interrupts = <2 11 2>; + interrupt-parent = <500>; + reg = <900 80>; + }; + + mscan@980 { + device_type = "mscan"; + compatible = "mpc5200b-mscan\0mpc52xx-mscan"; + interrupts = <1 12 2>; + interrupt-parent = <500>; + reg = <980 80>; + }; + + pci@0d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "mpc5200b-pci\0mpc52xx-pci"; + // I actually know very little about setting up PCI, + // so anything here would just be pulled out of my + // butt. Instead I'll leave these placeholders until + // I figure out what it should be + // + // interrupt-map-mask = <>; + // interrupt-map = <>; + // bus-range = <>; + // ranges = <>; + // + clock-frequency = <3f940aa>; + interrupts = <2 8 2 2 9 2 2 a 2>; + interrupt-parent = <500>; + }; + + spi@f00 { + device_type = "spi"; + compatible = "mpc5200b-spi\0mpc52xx-spi"; + reg = ; + interrupts = <2 d 2 2 e 2>; + interrupt-parent = <500>; + }; + + bestcomm@1200 { + device_type = "dma-controller"; + compatible = "mpc5200b-bestcomm\0mpc5200-bestcomm\0mpc52xx-bestcomm"; + reg = <1200 80>; + }; + + serial@2000 { // PSC1 + device_type = "serial"; + compatible = "mpc5200b-psc-serial\0mpc52xx-psc-serial"; + port-number = <0>; // Logical port assignment + reg = <2000 100>; + interrupts = <2 1 2>; + interrupt-parent = <500>; + }; + + // PSC2 in spi mode example + spi@2200 { // PSC2 + device_type = "spi"; + compatible = "mpc5200b-psc-spi\0mpc52xx-psc-spi"; + reg = <2200 100>; + interrupts = <2 2 2>; + interrupt-parent = <500>; + }; + + // PSC3 in CODEC mode example + i2s@2400 { // PSC3 + device_type = "i2s"; + compatible = "mpc5200b-psc-i2s\0mpc52xx-psc-i2s"; + reg = <2400 100>; + interrupts = <2 3 2>; + interrupt-parent = <500>; + }; + + // PSC4 unconfigured + //serial@2600 { // PSC4 + // device_type = "serial"; + // compatible = "mpc5200b-psc-serial\0mpc52xx-psc-serial"; + // reg = <2600 100>; + // interrupts = <2 b 2>; + // interrupt-parent = <500>; + //}; + + // PSC5 unconfigured + //serial@2800 { // PSC5 + // device_type = "serial"; + // compatible = "mpc5200b-psc-serial\0mpc52xx-psc-serial"; + // reg = <2800 100>; + // interrupts = <2 c 2>; + // interrupt-parent = <500>; + //}; + + // PSC6 in AC97 mode example + ac97@2c00 { // PSC6 + device_type = "ac97"; + compatible = "mpc5200b-psc-ac97\0mpc52xx-psc-ac97"; + reg = <2c00 100>; + interrupts = <2 4 2>; + interrupt-parent = <500>; + }; + + ethernet@3000 { + device_type = "network"; + compatible = "mpc5200b-fec\0mpc52xx-fec"; + reg = <3000 800>; + mac-address = [ 02 03 04 05 06 07 ]; // Bad! + interrupts = <2 5 2>; + interrupt-parent = <500>; + }; + + ata@3a00 { + device_type = "ata"; + compatible = "mpc5200b-ata\0mpc52xx-ata"; + reg = <3a00 100>; + interrupts = <2 7 2>; + interrupt-parent = <500>; + }; + + i2c@3d00 { + device_type = "i2c"; + compatible = "mpc5200b-i2c\0mpc52xx-i2c"; + reg = <3d00 40>; + interrupts = <2 f 2>; + interrupt-parent = <500>; + }; + + i2c@3d40 { + device_type = "i2c"; + compatible = "mpc5200b-i2c\0mpc52xx-i2c"; + reg = <3d40 40>; + interrupts = <2 10 2>; + interrupt-parent = <500>; + }; + }; +}; -- 1.4.3.rc2.g0503