From: Dave Liu Date: Fri, 01 Dec 2006 12:00:37 +0800 Subject: [U-Boot-Users] [PATCH] MPC8360EMDS lowboot option In-Reply-To: <456FA55F.9000602@comcast.net> References: <456FA55F.9000602@comcast.net> Message-ID: <1164945637.3655.21.camel@localhost.localdomain> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, 2006-11-30 at 22:45 -0500, Jerry Van Baren wrote: > Hi Dave Liu, > > The following patch adds a configuration to do "low boot" (HRCW.BMS = 0) > as well as "high boot" (HRCW.BMS = 1). > > Many people, myself included :o) prefer to boot out of low memory. It > has an added benefit that, if you screw up the image of of u-boot in low > memory, you can switch SW9.3 FCFG and boot using the BCSR, which "high > boots" (assuming you smart enough to keep a valid u-boot image at > 0xFFF00000). The 8360EMDS u-boot is booting at low memory in default now. You can change it for high memory. > The patch is against the top of the denx.de repository (thanks, > Wolfgang, for pulling the fsl patches). Thanks Wolfgang and Stefan for pulling them.