From: Dave Liu Date: Fri, 01 Dec 2006 13:00:46 +0800 Subject: [U-Boot-Users] [PATCH]Fix the UEC driver bug of QE Message-ID: <1164949246.3655.53.camel@localhost.localdomain> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello, The patch prevents the GCC tool chain from striping useful code for optimization. It will make UEC ethernet driver workable, Otherwise the UEC will fail in tx when you are using gcc4.x. but the driver can work when using gcc3.4.3. Wolfgang and Stefan, I am really sorry for that. I used gcc3.4.3 when I developed it, so I didn't find it. please apply it, TIA. CHANGELOG *Prevent the GCC from striping code for optimization, Otherwise the UEC will tx failed when you are using gcc4.x. Signed-off-by: Dave Liu --- diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c index f640c81..c44a5be 100644 --- a/drivers/qe/uec.c +++ b/drivers/qe/uec.c @@ -1122,7 +1122,7 @@ static int uec_send(struct eth_device* d uec_private_t *uec; ucc_fast_private_t *uccf; volatile qe_bd_t *bd; - volatile u16 status; + u16 status; int i; int result = 0; @@ -1131,7 +1131,7 @@ static int uec_send(struct eth_device* d bd = uec->txBd; /* Find an empty TxBD */ - for (i = 0; BD_STATUS(bd) & TxBD_READY; i++) { + for (i = 0; bd->status & TxBD_READY; i++) { if (i > 0x100000) { printf("%s: tx buffer not ready\n", dev->name); return result; @@ -1150,13 +1150,11 @@ static int uec_send(struct eth_device* d ucc_fast_transmit_on_demand(uccf); /* Wait for buffer to be transmitted */ - status = BD_STATUS(bd); - for (i = 0; status & TxBD_READY; i++) { + for (i = 0; bd->status & TxBD_READY; i++) { if (i > 0x100000) { printf("%s: tx error\n", dev->name); return result; } - status = BD_STATUS(bd); } /* Ok, the buffer be transimitted */ @@ -1171,12 +1169,12 @@ static int uec_recv(struct eth_device* d { uec_private_t *uec = dev->priv; volatile qe_bd_t *bd; - volatile u16 status; + u16 status; u16 len; u8 *data; bd = uec->rxBd; - status = BD_STATUS(bd); + status = bd->status; while (!(status & RxBD_EMPTY)) { if (!(status & RxBD_ERROR)) { @@ -1190,7 +1188,7 @@ static int uec_recv(struct eth_device* d BD_LENGTH_SET(bd, 0); BD_STATUS_SET(bd, status | RxBD_EMPTY); BD_ADVANCE(bd, status, uec->p_rx_bd_ring); - status = BD_STATUS(bd); + status = bd->status; } uec->rxBd = bd; -------------- next part -------------- A non-text attachment was scrubbed... Name: fix-uec.patch Type: text/x-patch Size: 1640 bytes Desc: not available Url : http://lists.denx.de/pipermail/u-boot/attachments/20061201/e38666e7/attachment.bin