From: Christian Benvenuti Date: Mon, 11 Jun 2007 20:40:55 +0000 Subject: [LARTC] Re: vlan interfaces and tc Message-Id: <1181594455.19634.25.camel@benve-laptop> List-Id: References: <1181561487.5881.36.camel@benve-laptop> In-Reply-To: <1181561487.5881.36.camel@benve-laptop> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi, >.. so I'm probably missing / not seeing something simple, or I don't >know. >This setup works for real interface, as well as for bonding. During testing, >real interface is normally working in 192.168.100/24 subnet. Is there an interface configured on the same VLAN on the other side of the link? If there is not, ARP fails (no one replies to the requests) and you never transmit anything to 192.168.20.1 (which is why the filter is not even tested). For a quick test, you can hardcode the IP/MAC mapping with ip neigh add 192.168.20.1 lladdr dev eth1.11 Your exact same config works on my system. Regards /Christian [ http://benve.info ] _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc