From: Soeren Sonnenburg Date: Mon, 25 Jun 2007 19:35:28 +0000 Subject: Re: [lm-sensors] [PATCH] hwmon/coretemp: Fix a broken error path Message-Id: <1182800128.4674.4.camel@localhost> List-Id: References: <1182026585.4230.8.camel@localhost> <20070616231745.1b0f7bd9@hyperion.delvare> <1182071803.4815.5.camel@localhost> <467575BF.1090207@assembler.cz> <1182335403.21563.99.camel@localhost> <467AE640.9090409@assembler.cz> <1182779850.21781.11.camel@localhost> <46800759.6040605@assembler.cz> In-Reply-To: <46800759.6040605@assembler.cz> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Rudolf Marek Cc: lkml , LM Sensors On Mon, 2007-06-25 at 20:20 +0200, Rudolf Marek wrote: > > Hi Rudolf, > > > > just one more update: > > > > When I put my machine into s2ram and make it resume, one of the coretemp > > sensors gets lost. Ahh and I am already rmmod coretemp / loading > > microcode after resume / insmod coretemp... > > Hello, If I understand correctly you unload the driver before suspend. Resume, > update microcode, load the driver correct? no I did not unload the driver but rmmod it after resume before I load the microcode. > Please can you check dmesg if for example one core complains about bad microcode > version? indeed core1 still complains. and I just now loaded the new microcode ( rmmod of coretemp before and insmod after) and voila coretemp displays both cpu's again. So I guess the microcode reloading is done to soon after resume... Soeren -- Sometimes, there's a moment as you're waking, when you become aware of the real world around you, but you're still dreaming. _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors