From: Tobin Davis Subject: Re: Splitting up the HDA-INTEL modules Date: Tue, 15 Jan 2008 13:23:52 -0800 Message-ID: <1200432232.27806.120.camel@razman.gruemaster.com> References: <478CFD32.50405@harddisk.is-a-geek.org> <5f52f6d70801151120y76407dd4s4c876643ddc8ba95@mail.gmail.com> <76366b180801151206v74232379ufd318580feba8fb9@mail.gmail.com> <478D12D1.8030808@harddisk.is-a-geek.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from iron2.pdx.net (iron2.pdx.net [69.64.224.71]) by alsa0.perex.cz (Postfix) with ESMTP id E1D05243CB for ; Tue, 15 Jan 2008 22:24:24 +0100 (CET) In-Reply-To: <478D12D1.8030808@harddisk.is-a-geek.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Marco Schuster Cc: alsa-devel@alsa-project.org, Andrew Paprocki List-Id: alsa-devel@alsa-project.org Actually, if this were done correctly, it would use the /sys file system for configuration changes. /proc should be read only space. As it sits now, you should be able to change the model configuration by typing "echo /sys/module/snd_hda_intel/parameters/model", but I don't think it's setup to dynamic changing yet. The /proc/asound/card0/codec# file contains all of the connection configurations for each codec NID. With that and the model diagram from most vendors, it would be easy to reconfigure on the fly. On Tue, 2008-01-15 at 21:08 +0100, Marco Schuster wrote: > Andrew Paprocki schrieb: > > Could this all be done through a /proc interface? For example, a > > /proc/asound/hda directory which contained files representing the > > different connections in the chipset? > /proc isn't constant, right? > Marco > > PS: Is it usual here to CC all people on the thread? > > _______________________________________________ > Alsa-devel mailing list > Alsa-devel@alsa-project.org > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel -- Tobin Davis Memory should be the starting point of the present.