From: Stefan Roese Date: Fri, 1 Feb 2008 09:39:56 +0100 Subject: [U-Boot-Users] [PATCH] ppc4xx: Fix GPIO configuration for pcs440ep Message-ID: <1201855196-483-1-git-send-email-sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The SRD0_PFC0 register was not configured correctly to enable the GPIO's 49-63 for GPIO. They have been configured as trace signals. This patch fixes this by clearing the corresponding bit. Signed-off-by: Stefan Roese --- board/pcs440ep/pcs440ep.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index 90e99d3..96adbc9 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -175,7 +175,7 @@ int board_early_init_f(void) *-------------------------------------------------------------------*/ mfsdr(sdr_pci0, reg); mtsdr(sdr_pci0, 0x80000000 | reg); /* PCI arbiter enabled */ - mtsdr(sdr_pfc0, 0x00000100); /* Pin function: enable GPIO49-63 */ + mtsdr(sdr_pfc0, 0x00000000); /* Pin function: enable GPIO49-63 */ mtsdr(sdr_pfc1, 0x00048000); /* Pin function: UART0 has 4 pins, select IRQ5 */ return 0; -- 1.5.4.rc5