From: Luigi 'Comio' Mantellini Date: Wed, 13 Feb 2008 09:59:41 +0100 Subject: [U-Boot-Users] UNCACHED_SDRAM macro issue Message-ID: <1202893181.26414.141.camel@cartesio> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi list, I'm working on the porting of u-boot (1.3.1 from git) to a mips based SoC. The port seems to work fine unless the UNCACHED_SDRAM macro (used by do_bootm_linux). Using the version from commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d (that maps the addresses on KSEG1 instead on physical addresses) the linux kernel is not able to start, while changing the macro to a PHYSADDR(a) (how was before the commit) the linux kernel starts without any problem. In order to make my system bootable I changed the macro UNCACHED_SDRAM from: #define UNCACHED_SDRAM(a) KSEG1ADDR(a) to #define UNCACHED_SDRAM(a) PHYSADDR(a) (how defined before the commit de9a738...) What I need to change on my board specific u-boot in order to use the KSEG1 address space? thanks a lot luigi -- ______ Luigi Mantellini .'______'. R&D - Software (.' '.) Industrie Dial Face S.p.A. ( :=----=: ) Via Canzo, 4 ('.______.') 20068 Peschiera Borromeo (MI), Italy '.______.' Tel.: +39 02 5167 2813 Fax: +39 02 5167 2459 Ind. Dial Face Email: luigi.mantellini at idf-hit.com