From: Dave Liu Date: Wed, 26 Mar 2008 18:02:07 +0800 Subject: [U-Boot-Users] [PATCH v3 10/10] mpc83xx: enable the SATA interface on mpc837xemds board Message-ID: <1206525727.3662.27.camel@localhost.localdomain> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Enable the first two SATA interfaces on MPC837xEMDS board, The two SATA ports are on LYNX1. (SATA0/1 on J4/5) Signed-off-by: Dave Liu --- include/configs/MPC837XEMDS.h | 23 +++++++++++++++++++++++ 1 files changed, 23 insertions(+), 0 deletions(-) diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 4006026..7c4e76e 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -395,6 +395,29 @@ #define CONFIG_FSL_SERDES2 0xe3100 /* + * SATA + */ +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CFG_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CFG_SATA1_OFFSET 0x18000 +#define CFG_SATA1 (CFG_IMMR + CFG_SATA1_OFFSET) +#define CFG_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CFG_SATA2_OFFSET 0x19000 +#define CFG_SATA2 (CFG_IMMR + CFG_SATA2_OFFSET) +#define CFG_SATA2_FLAGS FLAGS_DMA + +#ifdef CONFIG_FSL_SATA +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +/* * Environment */ #ifndef CFG_RAMBOOT -- 1.5.4.rc4