From: Tobin Davis Subject: HDA Power management. Date: Tue, 05 Aug 2008 15:13:36 -0700 Message-ID: <1217974416.11773.127.camel@razman> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from iron2.pdx.net (iron2.pdx.net [69.64.224.71]) by alsa0.perex.cz (Postfix) with ESMTP id 6880124652 for ; Wed, 6 Aug 2008 00:13:39 +0200 (CEST) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: ALSA Developers Cc: Takashi Iwai List-Id: alsa-devel@alsa-project.org Ok, I've been studying the code for a couple of weeks now, and testing on a mobile type development platform with a Realtek ALC262, but I have not been able to get the audio codec to enter low power mode (D3). I can see it switch when running that other OS. When running, the chip draws ~400mw, but drops to 40mw after switching to low power mode. How do I get it to do the same with the current driver? I'm using the git tip for alsa, and 2.6.26 final kernel. I have tried setting the power mode to D3 using the hda-tool from Takashi, but the codec reverts to D0 (full power) after a second or two, even though there is nothing touching the audio in my test environment. -- Tobin Davis The beauty of a pun is in the "Oy!" of the beholder.