From: Kumar Gala Date: Mon, 8 Sep 2008 08:51:29 -0500 Subject: [U-Boot] [PATCH v2] 85xx: Ensure timebase is zero on secondary cores Message-ID: <1220881889-17041-1-git-send-email-galak@kernel.crashing.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The e500um says the timebase is volatile out of reset. To ensure TB sync works we need to make sure its zero. Signed-off-by: Kumar Gala --- Swapped mftbl,mftbu at Scott's request.. it doesnt mater since TB isn't ticking when we do this. - k cpu/mpc85xx/release.S | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-) diff --git a/cpu/mpc85xx/release.S b/cpu/mpc85xx/release.S index 75676b5..ec5e4da 100644 --- a/cpu/mpc85xx/release.S +++ b/cpu/mpc85xx/release.S @@ -37,6 +37,11 @@ __secondary_start_page: li r3,0x201 mtspr SPRN_BUCSR,r3 + /* Ensure TB is 0 */ + li r3,0 + mttbl r3 + mttbu r3 + /* Enable/invalidate the I-Cache */ mfspr r0,SPRN_L1CSR1 ori r0,r0,(L1CSR1_ICFI|L1CSR1_ICE) -- 1.5.5.1