Return-path: Received: from mx1.redhat.com (mx1.redhat.com [172.16.48.31]) by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id n0V1fl7r002537 for ; Fri, 30 Jan 2009 20:41:47 -0500 Received: from mail-in-06.arcor-online.net (mail-in-06.arcor-online.net [151.189.21.46]) by mx1.redhat.com (8.13.8/8.13.8) with ESMTP id n0V1fQTP018626 for ; Fri, 30 Jan 2009 20:41:27 -0500 From: hermann pitton To: Yves Le Feuvre In-Reply-To: <4982B64C.3010608@inserm.fr> References: <497979FF.5090600@inserm.fr> <1232755686.5451.7.camel@pc10.localdom.local> <497D71BB.4050306@inserm.fr> <1233179327.4396.42.camel@pc10.localdom.local> <4982B64C.3010608@inserm.fr> Content-Type: text/plain Date: Sat, 31 Jan 2009 02:41:56 +0100 Message-Id: <1233366116.2685.18.camel@pc10.localdom.local> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Cc: video4linux-list@redhat.com Subject: Re: asus Europa2 OEM regression ? List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: video4linux-list-bounces@redhat.com Errors-To: video4linux-list-bounces@redhat.com List-ID: Hi Yves, Am Freitag, den 30.01.2009, 09:11 +0100 schrieb Yves Le Feuvre: > Hello again, > > First, thanks for your help. I wonder if anybody else using that card > has experienced similar regression. > here is the output of a few commands, each time after cold boot > (unplugged power supply...). I am sorry the mesg is quite long > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< > << REAL COLD BOOT 2.6.25.19 ! >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > > [root@computer]# uname -sr > Linux 2.6.25.19 > [root@computer]# dmesg -c 2>&1>/dev/null > [root@computer]# /sbin/rmmod tuner > [root@computer]# /sbin/rmmod tda9887 > [root@computer]# /sbin/modprobe tda9887 debug=2 > [root@computer]# /sbin/modprobe tuner debug=2 > [root@computer]# dmesg > tuner' 2-0043: chip found @ 0x86 (saa7134[0]) > tda9887 2-0043: tda988[5/6/7] found > tuner' 2-0043: type set to tda9887 ok, is there. > tuner' 2-0043: tv freq set to 0.00 > tuner' 2-0043: TV freq (0.00) out of range (44-958) > tda9887 2-0043: Unsupported tvnorm entry - audio muted > tda9887 2-0043: writing: b=0xc0 c=0x00 e=0x00 > tda9887 2-0043: write: byte B 0xc0 > tda9887 2-0043: B0 video mode : sound trap > tda9887 2-0043: B1 auto mute fm : no > tda9887 2-0043: B2 carrier mode : Intercarrier > tda9887 2-0043: B3-4 tv sound/radio : AM/TV > tda9887 2-0043: B5 force mute audio: no > tda9887 2-0043: B6 output port 1 : high (inactive) > tda9887 2-0043: B7 output port 2 : high (inactive) > tda9887 2-0043: write: byte C 0x00 > tda9887 2-0043: C0-4 top adjustment : -16 dB > tda9887 2-0043: C5-6 de-emphasis : no > tda9887 2-0043: C7 audio gain : 0 > tda9887 2-0043: write: byte E 0x00 > tda9887 2-0043: E0-1 sound carrier : 4.5 MHz > tda9887 2-0043: E6 l pll gating : 13 > tda9887 2-0043: E2-4 video if : 58.75 MHz > tda9887 2-0043: E5 tuner gain : normal > tda9887 2-0043: E7 vif agc output : pin3+pin22 port > tda9887 2-0043: -- > tuner' 2-0043: saa7134[0] tuner' I2C addr 0x86 with type 74 used for 0x0e > tuner' 2-0043: v4l2_int ioctl TUNER_SET_TYPE_ADDR, dir=-w (0x4004645a) > tuner' 2-0043: Calling set_type_addr for type=63, addr=0xff, mode=0x04, > config=0x00 > tuner' 2-0043: set addr for type 74 > tuner' 2-0061: Setting mode_mask to 0x0e > tuner' 2-0061: chip found @ 0xc2 (saa7134[0]) > tuner' 2-0061: tuner 0x61: Tuner type absent > tuner' 2-0061: v4l2_int ioctl TUNER_SET_TYPE_ADDR, dir=-w (0x4004645a) > tuner' 2-0061: Calling set_type_addr for type=63, addr=0xff, mode=0x04, > config=0x00 > tuner' 2-0061: set addr for type -1 > tuner' 2-0061: defining GPIO callback > tuner-simple 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) > tuner' 2-0061: type set to Philips FMD1216ME M > tuner' 2-0061: tv freq set to 400.00 > tuner-simple 2-0061: tv: param 0, range 1 > tuner-simple 2-0061: Freq= 400.00 MHz, V_IF=38.93 MHz, Offset=0.00 MHz, > div=7023 > tuner' 2-0043: v4l2_int ioctl TUNER_SET_CONFIG, dir=-w (0x4008645c) > tda9887 2-0043: Unsupported tvnorm entry - audio muted > tda9887 2-0043: writing: b=0x00 c=0x00 e=0x00 > tda9887 2-0043: write: byte B 0x00 > tda9887 2-0043: B0 video mode : sound trap > tda9887 2-0043: B1 auto mute fm : no > tda9887 2-0043: B2 carrier mode : Intercarrier > tda9887 2-0043: B3-4 tv sound/radio : AM/TV > tda9887 2-0043: B5 force mute audio: no > tda9887 2-0043: B6 output port 1 : low (active) > tda9887 2-0043: B7 output port 2 : low (active) > tda9887 2-0043: write: byte C 0x00 > tda9887 2-0043: C0-4 top adjustment : -16 dB > tda9887 2-0043: C5-6 de-emphasis : no > tda9887 2-0043: C7 audio gain : 0 > tda9887 2-0043: write: byte E 0x00 > tda9887 2-0043: E0-1 sound carrier : 4.5 MHz > tda9887 2-0043: E6 l pll gating : 13 > tda9887 2-0043: E2-4 video if : 58.75 MHz > tda9887 2-0043: E5 tuner gain : normal > tda9887 2-0043: E7 vif agc output : pin3+pin22 port > tda9887 2-0043: -- > tuner' 2-0061: v4l2_int ioctl TUNER_SET_CONFIG, dir=-w (0x4008645c) > tuner-simple 2-0061: tv 0x1b 0x6f 0x86 0x52 > tuner' 2-0061: saa7134[0] tuner' I2C addr 0xc2 with type 63 used for 0x0e > [root@computer]# tzap -a 1 ARTE > using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0' > tuning to 490167000 Hz > video pid 0x0208, audio pid 0x0212 > status 00 | signal a7a7 | snr c3c3 | ber 0001fffe | unc 00000000 | > status 00 | signal a8a8 | snr 3030 | ber 0001fffe | unc 00000000 | > status 00 | signal a9a9 | snr 4c4c | ber 0001fffe | unc 00000000 | > status 05 | signal a8a8 | snr f8f8 | ber 000081d2 | unc ffffffff | > status 1f | signal a9a9 | snr fefe | ber 00008204 | unc 00000000 | > FE_HAS_LOCK > status 1f | signal a8a8 | snr fdfd | ber 00007a7e | unc 00000000 | > FE_HAS_LOCK > ^C > [root@hppavillon yves]# dmesg > tuner' 2-0043: chip found @ 0x86 (saa7134[0]) > tda9887 2-0043: tda988[5/6/7] found > tuner' 2-0043: type set to tda9887 > tuner' 2-0043: tv freq set to 0.00 > tuner' 2-0043: TV freq (0.00) out of range (44-958) > tda9887 2-0043: Unsupported tvnorm entry - audio muted > tda9887 2-0043: writing: b=0xc0 c=0x00 e=0x00 > tda9887 2-0043: write: byte B 0xc0 > tda9887 2-0043: B0 video mode : sound trap > tda9887 2-0043: B1 auto mute fm : no > tda9887 2-0043: B2 carrier mode : Intercarrier > tda9887 2-0043: B3-4 tv sound/radio : AM/TV > tda9887 2-0043: B5 force mute audio: no > tda9887 2-0043: B6 output port 1 : high (inactive) > tda9887 2-0043: B7 output port 2 : high (inactive) > tda9887 2-0043: write: byte C 0x00 > tda9887 2-0043: C0-4 top adjustment : -16 dB > tda9887 2-0043: C5-6 de-emphasis : no > tda9887 2-0043: C7 audio gain : 0 > tda9887 2-0043: write: byte E 0x00 > tda9887 2-0043: E0-1 sound carrier : 4.5 MHz > tda9887 2-0043: E6 l pll gating : 13 > tda9887 2-0043: E2-4 video if : 58.75 MHz > tda9887 2-0043: E5 tuner gain : normal > tda9887 2-0043: E7 vif agc output : pin3+pin22 port > tda9887 2-0043: -- > tuner' 2-0043: saa7134[0] tuner' I2C addr 0x86 with type 74 used for 0x0e > tuner' 2-0043: v4l2_int ioctl TUNER_SET_TYPE_ADDR, dir=-w (0x4004645a) > tuner' 2-0043: Calling set_type_addr for type=63, addr=0xff, mode=0x04, > config=0x00 > tuner' 2-0043: set addr for type 74 > tuner' 2-0061: Setting mode_mask to 0x0e > tuner' 2-0061: chip found @ 0xc2 (saa7134[0]) > tuner' 2-0061: tuner 0x61: Tuner type absent > tuner' 2-0061: v4l2_int ioctl TUNER_SET_TYPE_ADDR, dir=-w (0x4004645a) > tuner' 2-0061: Calling set_type_addr for type=63, addr=0xff, mode=0x04, > config=0x00 > tuner' 2-0061: set addr for type -1 > tuner' 2-0061: defining GPIO callback > tuner-simple 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) > tuner' 2-0061: type set to Philips FMD1216ME M > tuner' 2-0061: tv freq set to 400.00 > tuner-simple 2-0061: tv: param 0, range 1 > tuner-simple 2-0061: Freq= 400.00 MHz, V_IF=38.93 MHz, Offset=0.00 MHz, > div=7023 > tuner' 2-0043: v4l2_int ioctl TUNER_SET_CONFIG, dir=-w (0x4008645c) > tda9887 2-0043: Unsupported tvnorm entry - audio muted > tda9887 2-0043: writing: b=0x00 c=0x00 e=0x00 > tda9887 2-0043: write: byte B 0x00 > tda9887 2-0043: B0 video mode : sound trap > tda9887 2-0043: B1 auto mute fm : no > tda9887 2-0043: B2 carrier mode : Intercarrier > tda9887 2-0043: B3-4 tv sound/radio : AM/TV > tda9887 2-0043: B5 force mute audio: no > tda9887 2-0043: B6 output port 1 : low (active) > tda9887 2-0043: B7 output port 2 : low (active) > tda9887 2-0043: write: byte C 0x00 > tda9887 2-0043: C0-4 top adjustment : -16 dB > tda9887 2-0043: C5-6 de-emphasis : no > tda9887 2-0043: C7 audio gain : 0 > tda9887 2-0043: write: byte E 0x00 > tda9887 2-0043: E0-1 sound carrier : 4.5 MHz > tda9887 2-0043: E6 l pll gating : 13 > tda9887 2-0043: E2-4 video if : 58.75 MHz > tda9887 2-0043: E5 tuner gain : normal > tda9887 2-0043: E7 vif agc output : pin3+pin22 port > tda9887 2-0043: -- > tuner' 2-0061: v4l2_int ioctl TUNER_SET_CONFIG, dir=-w (0x4008645c) > tuner-simple 2-0061: tv 0x1b 0x6f 0x86 0x52 > tuner' 2-0061: saa7134[0] tuner' I2C addr 0xc2 with type 63 used for 0x0e > tda1004x: setting up plls for 53MHz sampling clock > tda1004x: found firmware revision 20 -- ok > [root@computer]# cat /proc/interrupts > CPU0 CPU1 > 0: 265 0 IO-APIC-edge timer > 1: 2135 378 IO-APIC-edge i8042 > 7: 0 0 IO-APIC-edge parport0 > 8: 3 0 IO-APIC-edge rtc > 9: 0 0 IO-APIC-fasteoi acpi > 12: 12702 0 IO-APIC-edge i8042 > 14: 4826 0 IO-APIC-edge ata_piix > 15: 0 0 IO-APIC-edge ata_piix > 16: 57711 870 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel, > saa7134[0], nvidia > 17: 1854 69635 IO-APIC-fasteoi cx88[0], cx88[0] > 18: 37 0 IO-APIC-fasteoi uhci_hcd:usb4 > 19: 13053 0 IO-APIC-fasteoi uhci_hcd:usb3, ata_piix > 20: 347 0 IO-APIC-fasteoi ohci1394, eth0 > 23: 894 24123 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2 > NMI: 0 0 Non-maskable interrupts > LOC: 59452 60268 Local timer interrupts > RES: 1477 1179 Rescheduling interrupts > CAL: 273 399 function call interrupts > TLB: 282 608 TLB shootdowns > TRM: 0 0 Thermal event interrupts > SPU: 0 0 Spurious interrupts > ERR: 0 > MIS: 0 > [root@computer]# > > > > > > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< > << REAL COLD BOOT with 2.6.28.1 vanilla (not v4l-dvb git! >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > > > [root@computer]$ dmesg -c 2>&1>/dev/null > [root@computer]$ uname -sr > Linux 2.6.28.1 > [root@computer]# lsmod | grep tda > tda1004x 17156 1 > i2c_core 21908 14 > dvb_pll,cx22702,tuner_simple,tda1004x,saa7134_dvb,cx88_vp3054_i2c,tuner,saa7134,nvidia,i2c_i801,v4l2_common,cx88xx,i2c_algo_bit,tveeprom > [root@computer]# lsmod | grep tuner > tuner_simple 15376 1 > tuner_types 17792 1 tuner_simple > tuner 25540 0 > v4l2_common 16896 3 tuner,saa7134,cx8800 > i2c_core 21908 14 > dvb_pll,cx22702,tuner_simple,tda1004x,saa7134_dvb,cx88_vp3054_i2c,tuner,saa7134,nvidia,i2c_i801,v4l2_common,cx88xx,i2c_algo_bit,tveeprom > videodev 37632 5 tuner,saa7134,cx8800,v4l2_common,cx88xx > [root@computer]# modprobe -r tda9887 > [root@computer]# modprobe -r tuner > [root@computer]# modprobe -r saa7134_dvb > [root@computer]# modprobe -r saa7134 > [root@computer]# modprobe -r tuner_simple > [root@computer]# lsmod | grep tuner > [root@computer]# lsmod | grep tda > tda1004x 17156 0 > i2c_core 21908 10 > dvb_pll,cx22702,tda1004x,cx88_vp3054_i2c,nvidia,i2c_i801,v4l2_common,cx88xx,i2c_algo_bit,tveeprom > [root@computer]# /sbin/modprobe tda9887 debug=2 > [root@computer]# /sbin/modprobe tuner_simple debug=2 > [root@computer]# /sbin/modprobe saa7134 > [root@computer]# /sbin/modprobe saa7134_dvb > [root@computer]# dmesg > tuner-simple 2-0061: destroying instance > saa7130/34: v4l2 driver version 0.2.14 loaded > saa7134[0]: found at 0000:02:04.0, rev: 1, irq: 16, latency: 32, mmio: > 0xf9ffe000 > saa7134[0]: subsystem: 1043:4860, board: Asus Europa2 OEM > [card=100,autodetected] > saa7134[0]: board init: gpio is 0 > saa7134[0]: i2c eeprom 00: 43 10 60 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 > saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom 20: 01 40 01 03 03 02 03 04 08 ff 00 4c ff ff ff ff > saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom 40: ff 1d 00 c2 86 10 01 01 0d 01 ff ff ff ff ff ff > saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: registered device video1 [v4l2] > saa7134[0]: registered device vbi1 > saa7134[0]: registered device radio0 > dvb_init() allocating 1 frontend > saa7134[0]/irq[10,350637]: r=0x20 s=0x00 PE > saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit > tuner-simple 2-0061: creating new instance > tuner-simple 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) > tuner-simple 2-0061: tuner 0 atv rf input will be autoselected > tuner-simple 2-0061: tuner 0 dtv rf input will be autoselected OK, is not there. > DVB: registering new adapter (saa7134[0]) > DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)... > tda1004x: setting up plls for 53MHz sampling clock > tda1004x: found firmware revision 20 -- ok > [root@computer]# tzap -a 0 ARTE > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > tuning to 490167000 Hz > video pid 0x0208, audio pid 0x0212 > status 00 | signal a7a7 | snr 6d6d | ber 0001fffe | unc 00000000 | > status 00 | signal a8a8 | snr 3636 | ber 0001fffe | unc 00000000 | > status 00 | signal a8a8 | snr 4a4a | ber 0001fffe | unc 00000000 | > status 00 | signal a8a8 | snr 6b6b | ber 0001fffe | unc 00000000 | > status 00 | signal a9a9 | snr a3a3 | ber 0001fffe | unc 00000000 | > status 00 | signal a8a8 | snr ffff | ber 0001fffe | unc 00000000 | > status 00 | signal a8a8 | snr 4747 | ber 0001fffe | unc 00000000 | > status 00 | signal a8a8 | snr f1f1 | ber 0001fffe | unc 00000000 | > status 00 | signal a8a8 | snr 3939 | ber 0001fffe | unc 00000000 | > status 00 | signal a8a8 | snr 5454 | ber 0001fffe | unc 00000000 | > status 00 | signal a8a8 | snr 8c8c | ber 0001fffe | unc 00000000 | > ^C No lock ever. > [root@computer]# dmesg > tuner-simple 2-0061: destroying instance > saa7130/34: v4l2 driver version 0.2.14 loaded > saa7134[0]: found at 0000:02:04.0, rev: 1, irq: 16, latency: 32, mmio: > 0xf9ffe000 > saa7134[0]: subsystem: 1043:4860, board: Asus Europa2 OEM > [card=100,autodetected] > saa7134[0]: board init: gpio is 0 > saa7134[0]: i2c eeprom 00: 43 10 60 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 > saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom 20: 01 40 01 03 03 02 03 04 08 ff 00 4c ff ff ff ff > saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom 40: ff 1d 00 c2 86 10 01 01 0d 01 ff ff ff ff ff ff > saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: registered device video1 [v4l2] > saa7134[0]: registered device vbi1 > saa7134[0]: registered device radio0 > dvb_init() allocating 1 frontend > saa7134[0]/irq[10,350637]: r=0x20 s=0x00 PE > saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit > tuner-simple 2-0061: creating new instance > tuner-simple 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) > tuner-simple 2-0061: tuner 0 atv rf input will be autoselected > tuner-simple 2-0061: tuner 0 dtv rf input will be autoselected > DVB: registering new adapter (saa7134[0]) > DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)... > tda1004x: setting up plls for 53MHz sampling clock > tda1004x: found firmware revision 20 -- ok > tda1004x: setting up plls for 53MHz sampling clock > tda1004x: found firmware revision 20 -- ok > tuner-simple 2-0061: using tuner params #1 (digital) > tuner-simple 2-0061: freq = 490.12 (7842), range = 4, config = 0xbc, cb > = 0x44 > tuner-simple 2-0061: Philips FMD1216ME MK3 Hybrid Tuner: div=3157 | > buf=0x0c,0x55,0xbc,0x4c > tuner-simple 2-0061: using tuner params #1 (digital) > tuner-simple 2-0061: freq = 490.12 (7842), range = 4, config = 0xbc, cb > = 0x44 > tuner-simple 2-0061: Philips FMD1216ME MK3 Hybrid Tuner: div=3157 | > buf=0x0c,0x55,0xbc,0x4c > tuner-simple 2-0061: using tuner params #1 (digital) > tuner-simple 2-0061: freq = 490.12 (7842), range = 4, config = 0xbc, cb > = 0x44 > tuner-simple 2-0061: Philips FMD1216ME MK3 Hybrid Tuner: div=3157 | > buf=0x0c,0x55,0xbc,0x4c > tuner-simple 2-0061: using tuner params #1 (digital) > tuner-simple 2-0061: freq = 490.12 (7842), range = 4, config = 0xbc, cb > = 0x44 > tuner-simple 2-0061: Philips FMD1216ME MK3 Hybrid Tuner: div=3157 | > buf=0x0c,0x55,0xbc,0x4c > tuner-simple 2-0061: using tuner params #1 (digital) > tuner-simple 2-0061: freq = 490.12 (7842), range = 4, config = 0xbc, cb > = 0x44 > tuner-simple 2-0061: Philips FMD1216ME MK3 Hybrid Tuner: div=3157 | > buf=0x0c,0x55,0xbc,0x4c > tuner-simple 2-0061: using tuner params #1 (digital) > tuner-simple 2-0061: freq = 490.12 (7842), range = 4, config = 0xbc, cb > = 0x44 > tuner-simple 2-0061: Philips FMD1216ME MK3 Hybrid Tuner: div=3157 | > buf=0x0c,0x55,0xbc,0x4c > tuner-simple 2-0061: using tuner params #1 (digital) > tuner-simple 2-0061: freq = 490.12 (7842), range = 4, config = 0xbc, cb > = 0x44 > tuner-simple 2-0061: Philips FMD1216ME MK3 Hybrid Tuner: div=3157 | > buf=0x0c,0x55,0xbc,0x4c > tuner-simple 2-0061: using tuner params #1 (digital) > tuner-simple 2-0061: freq = 490.12 (7842), range = 4, config = 0xbc, cb > = 0x44 > tuner-simple 2-0061: Philips FMD1216ME MK3 Hybrid Tuner: div=3157 | > buf=0x0c,0x55,0xbc,0x4c > tuner-simple 2-0061: using tuner params #1 (digital) > tuner-simple 2-0061: freq = 490.12 (7842), range = 4, config = 0xbc, cb > = 0x44 > tuner-simple 2-0061: Philips FMD1216ME MK3 Hybrid Tuner: div=3157 | > buf=0x0c,0x55,0xbc,0x4c > tuner-simple 2-0061: using tuner params #1 (digital) > tuner-simple 2-0061: freq = 490.12 (7842), range = 4, config = 0xbc, cb > = 0x44 > tuner-simple 2-0061: Philips FMD1216ME MK3 Hybrid Tuner: div=3157 | > buf=0x0c,0x55,0xbc,0x4c > tuner-simple 2-0061: using tuner params #1 (digital) > tuner-simple 2-0061: freq = 490.12 (7842), range = 4, config = 0xbc, cb > = 0x44 > tuner-simple 2-0061: Philips FMD1216ME MK3 Hybrid Tuner: div=3157 | > buf=0x0c,0x55,0xbc,0x4c > tuner-simple 2-0061: using tuner params #1 (digital) > tuner-simple 2-0061: freq = 490.12 (7842), range = 4, config = 0xbc, cb > = 0x44 > tuner-simple 2-0061: Philips FMD1216ME MK3 Hybrid Tuner: div=3157 | > buf=0x0c,0x55,0xbc,0x4c > tuner-simple 2-0061: using tuner params #1 (digital) > tuner-simple 2-0061: freq = 490.12 (7842), range = 4, config = 0xbc, cb > = 0x44 > tuner-simple 2-0061: Philips FMD1216ME MK3 Hybrid Tuner: div=3157 | > buf=0x0c,0x55,0xbc,0x4c > tuner-simple 2-0061: using tuner params #1 (digital) > tuner-simple 2-0061: freq = 490.12 (7842), range = 4, config = 0xbc, cb > = 0x44 > tuner-simple 2-0061: Philips FMD1216ME MK3 Hybrid Tuner: div=3157 | > buf=0x0c,0x55,0xbc,0x4c > [root@computer]# cat /proc/interrupts > CPU0 CPU1 > 0: 136 0 IO-APIC-edge timer > 1: 1031 1246 IO-APIC-edge i8042 > 7: 0 0 IO-APIC-edge parport0 > 8: 47 0 IO-APIC-edge rtc0 > 9: 0 0 IO-APIC-fasteoi acpi > 12: 46389 4068 IO-APIC-edge i8042 > 14: 6022 1 IO-APIC-edge ata_piix > 15: 0 0 IO-APIC-edge ata_piix > 16: 69585 830 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel, > nvidia, saa7134[0] > 17: 1824 85487 IO-APIC-fasteoi cx88[0], cx88[0] > 18: 38 0 IO-APIC-fasteoi uhci_hcd:usb4 > 19: 12800 0 IO-APIC-fasteoi ata_piix, uhci_hcd:usb3 > 20: 22 419 IO-APIC-fasteoi firewire_ohci, eth0 > 23: 8635 23285 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2 > NMI: 0 0 Non-maskable interrupts > LOC: 83434 81129 Local timer interrupts > RES: 1222 1489 Rescheduling interrupts > CAL: 10 173 Function call interrupts > TLB: 363 541 TLB shootdowns > TRM: 0 0 Thermal event interrupts > SPU: 0 0 Spurious interrupts > ERR: 0 > MIS: 0 > [root@computer]# tail -3 /etc/modprobe.d/modprobe.conf.dist > options tuner_simple debug=2 > options tda9887 debug=2 > options tuner debug=2 > > > > Hope this helps. If you need more debug with saa7134 module, please tell > me (coredebug, video_debug,i2c_debug?) > > > Thanks again for your help Sorry, not yet, but it is a very fine report already. Thanks! We need the tda9887 up at first to ensure undisclosed (damned: NDAs ;) switching can be excluded. I'm stupidly going from what I know from analog at first. Others might try the other way round. So, to reload the tuner (core) module does not bring back the tda9887 either for you? There is an i2c gate enabled to reach the tuner. Cheers, Hermann p.s. this will stay long winded until ... someone gives a short summary ;) -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list