Return-Path: Received: from semihalf.com (semihalf.com [206.130.101.55]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by ozlabs.org (Postfix) with ESMTPS id DEDE2DDD0B for ; Sat, 14 Feb 2009 03:13:20 +1100 (EST) From: Grzegorz Bernacki To: linuxppc-dev@ozlabs.org Subject: [PATCH v2] Configure PSC4 and PSC5 as UART. Date: Fri, 13 Feb 2009 17:13:13 +0100 Message-Id: <12345415932889-git-send-email-gjb@semihalf.com> List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On digsy MTC PSC4 and PSC5 should be configured as UART, not PSC3 and PSC4. Signed-off-by: Grzegorz Bernacki --- Version 2: - rebased to Ben Herrenschmidt's -next arch/powerpc/boot/dts/digsy_mtc.dts | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts index 0e85ebf..4c36186 100644 --- a/arch/powerpc/boot/dts/digsy_mtc.dts +++ b/arch/powerpc/boot/dts/digsy_mtc.dts @@ -155,18 +155,18 @@ reg = <0x1f00 0x100>; }; - serial@2400 { // PSC3 - compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - reg = <0x2400 0x100>; - interrupts = <2 3 0>; - }; - serial@2600 { // PSC4 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2600 0x100>; interrupts = <2 11 0>; }; + serial@2800 { // PSC5 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2800 0x100>; + interrupts = <2 12 0>; + }; + ethernet@3000 { compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; reg = <0x3000 0x400>; -- 1.5.2.2