From: Peter Tyser Date: Mon, 23 Feb 2009 09:52:20 -0600 Subject: [U-Boot] Status open patches: ARM, AT91, IXP, PXA In-Reply-To: <20090222000003.B598D832E43F@gemini.denx.de> References: <20090222000003.B598D832E43F@gemini.denx.de> Message-ID: <1235404340.6542.3887.camel@localhost.localdomain> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Sun, 2009-02-22 at 01:00 +0100, Wolfgang Denk wrote: > Dear Jean-Christophe, > > I have the following patches still marked as open in my list. Could > you please have a look... > > ARM, AT91: > > 04/24 michael [U-Boot-Users] [PATCH ARM 0/2] Ide support > 04/24 michael [U-Boot-Users] [PATCH ARM 1/2] Ide support io function > 04/24 michael [U-Boot-Users] [PATCH ARM 2/2] Ide support. Ide registration > 08/15 Sergey Lapin [U-Boot] [PATCH][Re-submit] Hardware watchdog support for AT91SAM9260 CPU > 08/28 Markus Kammerstet [U-Boot] PATCH: U-Boot support for Olimex SAM9L-9260 development board > 10/07 "Alan Carvalho de [U-Boot] [PATCH 2/3] iMX31: Add support to copy NAND Flash code to RAM > 10/07 "Alan Carvalho de [U-Boot] [PATCH 3/3] iMX31: Add support to iMX31PDK board boots from NAND Flash > 10/13 "Roman Mashak" [U-Boot] [PATCH] ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory > 10/21 Tomohiro Masubuch [U-Boot] [PATCH v4] Add support for KMC KZM-ARM11-01 board > 10/23 Magnus Lilja [U-Boot] [PATCH 1/2] i.MX31: Use do_div for some calculations. > 10/23 Magnus Lilja [U-Boot] [PATCH 2/2] i.MX31: Add basic support for Freescale's i.MX31 PDK board. > 11/07 Ilko Iliev [U-Boot] [PATCH] at91: add support for PM9261 board > 11/13 Chaofu Chen [U-Boot] [PATCH] bug fix for the delay function of ARM s3c44b0 > 11/21 Hugo Villeneuve [U-Boot] [PATCH 1/1] ARM DaVinci: Add common peripherals and modules enable functions. > 11/26 Jens Scharsig [U-Boot] [PATCH] AT91RM9200 BGA port D defines > 12/04 Stefan Althoefer [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1 > 12/11 Rohit Hagargundgi [U-Boot] [PATCH v2 2/4] Environment support for Flex-OneNAND > 12/11 Rohit Hagargundgi [U-Boot] [PATCH v2 3/4] JFFS2 commands support for Flex-OneNAND > 12/11 Rohit Hagargundgi [U-Boot] [PATCH v2 4/4] Flex-OneNAND boundary setting command > 12/11 Rohit Hagargundgi [U-Boot] [PATCH 0/3] Bad blocks and Partition support for OneNAND / Flex-OneNAND > 12/11 Rohit Hagargundgi [U-Boot] [PATCH 1/3] Bad block support for environment variables partition in OneNAND > 12/11 Rohit Hagargundgi [U-Boot] [PATCH 2/3] Add partition based OneNAND commands > 12/11 Rohit Hagargundgi [U-Boot] [PATCH 3/3] Create bad block aware partition table > 12/13 Jean-Christophe P [U-Boot] [PATCH] integratorap: fix PCI support > 12/14 Dirk Behme [U-Boot] [PATCH 01/15 v6] OMAP3: Add pin mux, clock and cpu headers > 12/14 Dirk Behme [U-Boot] [PATCH 05/15 v6] OMAP3: Add common board, interrupt and system info > 12/17 Peter Tyser [U-Boot] [PATCH v6 0/3] Support for XPedite5370 and misc GPIO The 3 patches above have already made it into mainline. Best, Peter