From: Mike Frysinger Date: Sun, 22 Mar 2009 22:45:37 -0400 Subject: [U-Boot] [PATCH 28/32] Blackfin: add hack for crappy m25p80 In-Reply-To: <1237776341-14992-1-git-send-email-vapier@gentoo.org> References: <1237776341-14992-1-git-send-email-vapier@gentoo.org> Message-ID: <1237776341-14992-29-git-send-email-vapier@gentoo.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Signed-off-by: Mike Frysinger --- board/bf537-stamp/spi_flash.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-) diff --git a/board/bf537-stamp/spi_flash.c b/board/bf537-stamp/spi_flash.c index 7b764b4..797daf2 100644 --- a/board/bf537-stamp/spi_flash.c +++ b/board/bf537-stamp/spi_flash.c @@ -51,6 +51,7 @@ static struct flash_info flash_st_serial_flash[] = { { "m25p10", 0x2011, 32 * 1024, 4 }, { "m25p20", 0x2012, 64 * 1024, 4 }, { "m25p40", 0x2013, 64 * 1024, 8 }, + { "m25p80", 0x20FF, 64 * 1024, 16 }, { "m25p16", 0x2015, 64 * 1024, 32 }, { "m25p32", 0x2016, 64 * 1024, 64 }, { "m25p64", 0x2017, 64 * 1024, 128 }, @@ -309,6 +310,11 @@ static int spi_detect_part(void) if (called_init) return 0; +#ifdef CONFIG_SPI_FLASH_M25P80 + flash.manufacturer_id = JED_MANU_ST; + flash.device_id1 = 0x20; + flash.device_id2 = 0xFF; +#else SPI_ON(); /* Send the request for the part identification */ @@ -328,6 +334,7 @@ static int spi_detect_part(void) flash.device_id2 = spi_write_read_byte(0); SPI_OFF(); +#endif dev_id = (flash.device_id1 << 8) | flash.device_id2; -- 1.6.2