From: Wolfgang Denk Date: Fri, 15 May 2009 09:19:52 +0200 Subject: [U-Boot] [PATCH 3/3 v2] TQM834x: use buffered writes to accelerate writing to flash In-Reply-To: <200905150608.13837.sr@denx.de> References: <200905150608.13837.sr@denx.de> Message-ID: <1242371992-7326-1-git-send-email-wd@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Also enable display of 'E'mpty sectors in "flinfo" output. Signed-off-by: Wolfgang Denk --- v2: fix "flinfo" misspelling include/configs/TQM834x.h | 7 +++---- 1 files changed, 3 insertions(+), 4 deletions(-) diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 5590d2e..c504ecb 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -78,13 +78,12 @@ * FLASH on the Local Bus */ #define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ -#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ #undef CONFIG_SYS_FLASH_CHECKSUM #define CONFIG_SYS_FLASH_BASE 0x80000000 /* start of FLASH */ #define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size in MB */ - -/* buffered writes in the AMD chip set is not supported yet */ -#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sectors */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* * FLASH bank number detection -- 1.6.0.6