From: Mikkel Christensen Subject: [PATCH v2 0/3] Support for OMAP3 Zoom2 board Date: Fri, 15 May 2009 12:40:32 -0500 Message-ID: <1242409235-18834-1-git-send-email-mlc@ti.com> Return-path: Received: from devils.ext.ti.com ([198.47.26.153]:42355 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753818AbZEORgd (ORCPT ); Fri, 15 May 2009 13:36:33 -0400 Received: from dlep33.itg.ti.com ([157.170.170.112]) by devils.ext.ti.com (8.13.7/8.13.7) with ESMTP id n4FHaTQt019706 for ; Fri, 15 May 2009 12:36:34 -0500 Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-omap@vger.kernel.org Cc: Mikkel Christensen The following patch series adds support for Zoom2 board. This is a new version made after comments from Kevin Hilman. An external debug board is included for console and LAN. For details refer to this site: http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp Future work: - SMSC911x NFS mount problem - Low level debug uart need to use debug board TI wiki with FAQs on getting this board booting: https://omapzoom.org/gf/project/omapzoom/wiki/?pagename=GettingStartedWithZoomII_AKA_OMAP34XII_MDP Diffstat: configs/omap3_zoom2_defconfig | 1211 ++++++++++++++++++++++++++++++++++++ mach-omap2/Kconfig | 4 mach-omap2/Makefile | 4 mach-omap2/board-zoom2-debugboard.c | 165 ++++ mach-omap2/board-zoom2.c | 109 +++ 5 files changed, 1492 insertions(+), 1 deletion(-)