From: Mark Brown Subject: [PATCH] ASoC: Switch FSL SSI DAI over to symmetric_rates Date: Sat, 23 May 2009 10:41:05 +0100 Message-ID: <1243071665-5968-1-git-send-email-broonie@opensource.wolfsonmicro.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from cassiel.sirena.org.uk (cassiel.sirena.org.uk [80.68.93.111]) by alsa0.perex.cz (Postfix) with ESMTP id 53FCB24594 for ; Sat, 23 May 2009 11:41:14 +0200 (CEST) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Timur Tabi Cc: alsa-devel@alsa-project.org, Mark Brown List-Id: alsa-devel@alsa-project.org The effect of symmetric_constraints should provide a standard way to enforce the use of the same sample rate for both directions. Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_ssi.c | 9 +++------ 1 files changed, 3 insertions(+), 6 deletions(-) diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 47afaa9..93f0f38 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -375,18 +375,14 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, struct snd_pcm_runtime *first_runtime = ssi_private->first_stream->runtime; - if (!first_runtime->rate || !first_runtime->sample_bits) { + if (!first_runtime->sample_bits) { dev_err(substream->pcm->card->dev, - "set sample rate and size in %s stream first\n", + "set sample size in %s stream first\n", substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? "capture" : "playback"); return -EAGAIN; } - snd_pcm_hw_constraint_minmax(substream->runtime, - SNDRV_PCM_HW_PARAM_RATE, - first_runtime->rate, first_runtime->rate); - /* If we're in synchronous mode, then we need to constrain * the sample size as well. We don't support independent sample * rates in asynchronous mode. @@ -693,6 +689,7 @@ struct snd_soc_dai *fsl_ssi_create_dai(struct fsl_ssi_info *ssi_info) fsl_ssi_dai->name = ssi_private->name; fsl_ssi_dai->id = ssi_info->id; fsl_ssi_dai->dev = ssi_info->dev; + fsl_ssi_dai->symmetric_rates = 1; ret = snd_soc_register_dai(fsl_ssi_dai); if (ret != 0) { -- 1.6.3.1