From: Jeff Hansen Date: Wed, 27 May 2009 05:05:12 +0000 Subject: [ath9k-devel] [PATCH 1/4] ath9k: Reset SC_OP_TSF_RESET flag after stuck beacon Message-ID: <1243400715-13561-1-git-send-email-x@jeffhansen.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org I have a TrendNet 652-BRP running OpenWRT + ath9k very well. The only problem is that the beacon gets stuck maybe once a day. After Vasanthakumar Thiagarajan's "ath9k: cleanup beacon parameters configuration" patch, ath9k would nearly re-configure the beacons after it detected the stuck beacon, and did a reset. But it would fail the SC_OP_TSF_RESET check in ath_beacon_config_ap. This patch gets the beacon fully reconfigured after the reset. Signed-off-by: Jeff Hansen --- drivers/net/wireless/ath/ath9k/beacon.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index a21b213..0c67ed2 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -411,6 +411,7 @@ void ath_beacon_tasklet(unsigned long data) } else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) { DPRINTF(sc, ATH_DBG_BEACON, "beacon is officially stuck\n"); + sc->sc_flags |= SC_OP_TSF_RESET; ath_reset(sc, false); } -- 1.6.0.4