From: Daniel Mack Date: Tue, 23 Jun 2009 17:30:04 +0200 Subject: [U-Boot] [PATCH 1/2] pxa: add clock for system bus 2 arbiter Message-ID: <1245771005-23299-1-git-send-email-daniel@caiaq.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This clock is needed for systems using the USB2 device unit or the 2d graphics accelerator. Signed-off-by: Daniel Mack --- include/asm-arm/arch-pxa/pxa-regs.h | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 5a0885a..1f81e11 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1952,6 +1952,7 @@ typedef void (*ExcpHndlr) (void) ; #define CKENA_2_USBHOST (1 << 2) /* USB Host Unit Clock Enable */ #define CKENA_1_LCD (1 << 1) /* LCD Unit Clock Enable */ +#define CKENB_9_SYSBUS2 (1 << 9) /* System bus 2 */ #define CKENB_8_1WIRE ((1 << 8) + 32) /* One Wire Interface Unit Clock Enable */ #define CKENB_7_GPIO ((1 << 7) + 32) /* GPIO Clock Enable */ #define CKENB_6_IRQ ((1 << 6) + 32) /* Interrupt Controller Clock Enable */ -- 1.6.3.1