From: =?ISO-8859-1?Q?Andr=E9?= Schwarz Date: Thu, 20 Aug 2009 09:37:58 +0200 Subject: [U-Boot] e1000 Rx timeout with 82541ER In-Reply-To: <7DF0AF56456B8F4081E3C44CCCE311DE5265CA@zch01exm23.fsl.freescale.net> References: <1250683805.22118.22.camel@swa-m460> <20090819125828.E09D6833DBD2@gemini.denx.de> <7DF0AF56456B8F4081E3C44CCCE311DE5265CA@zch01exm23.fsl.freescale.net> Message-ID: <1250753878.4046.0.camel@swa-m460> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, 2009-08-20 at 10:36 +0800, Zang Roy-R61911 wrote: > > > -----Original Message----- > > From: Wolfgang Denk [mailto:wd at denx.de] > > Sent: Wednesday, August 19, 2009 7:58 AM > > To: Andr? Schwarz > > Cc: Zang Roy-R61911; Ben Warren; U-Boot List > > Subject: Re: [U-Boot] e1000 Rx timeout with 82541ER > > > > Dear =?ISO-8859-1?Q?Andr=E9?= Schwarz, > > > > In message <1250683805.22118.22.camel@swa-m460> you wrote: > > > > > > with latest e1000.c my 82541ER connected to a MPC5200 via PCI is no > > > longer working correctly - I get timeouts after few packets. After > > > having a quick look at the code changes it's obvious that I can't > > > figure out the problem quickly since there has been a lot > > of changes. > > > > Well, it should be straightforward to git-bisect this issue... > > > Could you help to send me the error log? > I do not have 82541ER card to try. ok - please give me some days. Hopefully I can send you some output/questions on tuesday. Regards, Andr? > Thank.s > roy MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler Registergericht: Amtsgericht Stuttgart, HRB 271090 Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner, Hans-Joachim Reich