From: Vasanthakumar Thiagarajan Date: Mon, 31 Aug 2009 17:48:36 +0530 Subject: [ath9k-devel] [PATCH] ath9k: Do an AHB reset before doing RTC reset Message-ID: <1251721116-25758-1-git-send-email-vasanth@atheros.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Doing an RTC reset when DMA is active may corrupt memory, make sure no DMA is active at this moment by doing an AHB reset. Signed-off-by: Vasanthakumar Thiagarajan --- drivers/net/wireless/ath/ath9k/hw.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index e340dac..71f27f3 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1712,8 +1712,15 @@ static bool ath9k_hw_set_reset_power_on(struct ath_hw *ah) REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN | AR_RTC_FORCE_WAKE_ON_INT); + if (!AR_SREV_9100(ah)) + REG_WRITE(ah, AR_RC, AR_RC_AHB); + REG_WRITE(ah, AR_RTC_RESET, 0); udelay(2); + + if (!AR_SREV_9100(ah)) + REG_WRITE(ah, AR_RC, 0); + REG_WRITE(ah, AR_RTC_RESET, 1); if (!ath9k_hw_wait(ah, -- 1.5.5.1