Return-path: Received: from mx1.redhat.com (ext-mx01.extmail.prod.ext.phx2.redhat.com [10.5.110.5]) by int-mx02.intmail.prod.int.phx2.redhat.com (8.13.8/8.13.8) with ESMTP id n8DIuLK9012750 for ; Sun, 13 Sep 2009 14:56:21 -0400 Received: from corona.kreucher.net (corona.kreucher.net [72.44.84.246]) by mx1.redhat.com (8.13.8/8.13.8) with ESMTP id n8DIu8Tr002325 for ; Sun, 13 Sep 2009 14:56:08 -0400 Received: from localhost (localhost.localdomain [127.0.0.1]) by corona.kreucher.net (Postfix) with ESMTP id E7CBE3D60F23 for ; Sun, 13 Sep 2009 11:55:47 -0700 (PDT) Received: from corona.kreucher.net ([127.0.0.1]) by localhost (mail.kreucher.net [127.0.0.1]) (amavisd-new, port 10024) with LMTP id l1EayBwyqvUR for ; Sun, 13 Sep 2009 11:55:45 -0700 (PDT) Received: from [192.168.3.50] (c-98-246-163-229.hsd1.or.comcast.net [98.246.163.229]) by corona.kreucher.net (Postfix) with ESMTPSA id 51E3E3D60055 for ; Sun, 13 Sep 2009 11:55:45 -0700 (PDT) From: Nicholas J Kreucher To: video4linux-list@redhat.com Date: Sun, 13 Sep 2009 11:56:03 -0700 Message-Id: <1252868163.21699.150.camel@bluetote> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Subject: help adding card to saa7134 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: video4linux-list-bounces@redhat.com Errors-To: video4linux-list-bounces@redhat.com List-ID: Hello, I have a generic (read: cheap) card that has one SA7130HL chip and no eeprom. It has 4 inputs and one video out. I'm only interested in getting the 4 inputs working. As-is (card=0), one input works beautifully, so the first thing I tried was forcing cards 18 and then 20, two cards that also have 4 inputs according to the definition in saa7134-cards.c. However, when I plug in video feeds into more then one input, they "overlap". The image is essentially the same for comp1 through comp4. Sample images here... 1ch is using one channel at a time (to show actual images) and 2ch is using 2 inputs at the same time, showing overlap effect: http://nick.kreucher.net/tmp/saa7134/ So I simply tried adding a simple/newb card definition to saa7134-cards.c (below), but similar results: [SAA7134_BOARD_SVDVR] = { /* Nicholas J Kreucher */ .name = "SVDVR / Photec", .tuner_type = TUNER_ABSENT, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .inputs = {{ .name = name_comp1, .vmux = 0, }, { .name = name_comp2, .vmux = 1, }, { .name = name_comp3, .vmux = 2, }, { .name = name_comp4, .vmux = 3, }}, I see other definitions using things like gpio etc, perhaps that is what is needed here? I am unfamiliar with gpio, so I wouldn't know where to begin. Any help or advice is appreciated! I'll also try and hang out in #v4l as "njk". - nick -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list