Received: from smtp.gentoo.org ([140.211.166.183]) by bombadil.infradead.org with esmtps (Exim 4.69 #1 (Red Hat Linux)) id 1MquGp-0007ez-Eo for linux-mtd@lists.infradead.org; Thu, 24 Sep 2009 19:46:32 +0000 From: Mike Frysinger To: linux-mtd@lists.infradead.org, David Woodhouse Subject: [PATCH] mtd: m25p80: disable SST software protection bits by default Date: Thu, 24 Sep 2009 15:46:22 -0400 Message-Id: <1253821582-26331-1-git-send-email-vapier@gentoo.org> Cc: uclinux-dist-devel@blackfin.uclinux.org, Graf Yang List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , From: Graf Yang The SST SPI flashes is like Atmel SPI flashes in that the software protection bits are set by default at power up, so clear them at init time. Signed-off-by: Graf Yang Signed-off-by: Mike Frysinger --- i could have sworn i sent this out, but i cant find it in my e-mail log drivers/mtd/devices/m25p80.c | 7 ++++--- 1 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 379c316..933267a 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -775,11 +775,12 @@ static int __devinit m25p_probe(struct spi_device *spi) dev_set_drvdata(&spi->dev, flash); /* - * Atmel serial flash tend to power up - * with the software protection bits set + * Atmel and SST serial flash tend to power + * up with the software protection bits set */ - if (info->jedec_id >> 16 == 0x1f) { + if (info->jedec_id >> 16 == 0x1f || + info->jedec_id >> 16 == 0xbf) { write_enable(flash); write_sr(flash, 0); } -- 1.6.5.rc1