From: Nishanth Menon Subject: [PATCH] OMAP3:PM: reject disabled OPP Date: Fri, 25 Sep 2009 18:14:52 -0500 Message-ID: <1253920492-28628-1-git-send-email-nm@ti.com> Return-path: Received: from bear.ext.ti.com ([192.94.94.41]:40514 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750946AbZIYXOu (ORCPT ); Fri, 25 Sep 2009 19:14:50 -0400 Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-omap Cc: Kevin H , Nishanth Menon when the omap_opp structures are disabled by setting the frequency as 0 as below (as an example) {0, VDD2_OPP1, 0x1E}, program_opp attempts to set voltage even after frequency setting fails. we can instead return if we see invalid values for either frequency or voltage Signed-off-by: Nishanth Menon --- arch/arm/mach-omap2/resource34xx.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/resource34xx.c b/arch/arm/mach-omap2/resource34xx.c index 1693e9b..491e1dc 100644 --- a/arch/arm/mach-omap2/resource34xx.c +++ b/arch/arm/mach-omap2/resource34xx.c @@ -282,6 +282,11 @@ static int program_opp(int res, struct omap_opp *opp, int target_level, t_opp = ID_VDD(res) | ID_OPP_NO(opp[target_level].opp_id); c_opp = ID_VDD(res) | ID_OPP_NO(opp[current_level].opp_id); #endif + + /* Sanity check of the OPP params before attempting to set */ + if (!opp[target_level].rate || !opp[target_level].vsel) + return -EINVAL; + if (target_level > current_level) raise = 1; else -- 1.6.0.4