From: broonie@opensource.wolfsonmicro.com (Mark Brown) Date: Tue, 3 Nov 2009 14:42:07 +0000 Subject: [PATCH 4/9] S3C64XX: Provide logging when CPU frequencies are eliminated due to clocks In-Reply-To: <1257259332-7867-3-git-send-email-broonie@opensource.wolfsonmicro.com> References: <1257259332-7867-1-git-send-email-broonie@opensource.wolfsonmicro.com> <1257259332-7867-2-git-send-email-broonie@opensource.wolfsonmicro.com> <1257259332-7867-3-git-send-email-broonie@opensource.wolfsonmicro.com> Message-ID: <1257259332-7867-4-git-send-email-broonie@opensource.wolfsonmicro.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This provides symmetry with the voltage based checks done for the regulator. Signed-off-by: Mark Brown --- arch/arm/plat-s3c64xx/cpufreq.c | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-) diff --git a/arch/arm/plat-s3c64xx/cpufreq.c b/arch/arm/plat-s3c64xx/cpufreq.c index e6e0843..bdc3c96 100644 --- a/arch/arm/plat-s3c64xx/cpufreq.c +++ b/arch/arm/plat-s3c64xx/cpufreq.c @@ -217,8 +217,11 @@ static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) /* Check for frequencies we can generate */ r = clk_round_rate(armclk, freq->frequency * 1000); r /= 1000; - if (r != freq->frequency) + if (r != freq->frequency) { + pr_debug("cpufreq: %dkHz unsupported by clock\n", + freq->frequency); freq->frequency = CPUFREQ_ENTRY_INVALID; + } /* If we have no regulator then assume startup * frequency is the maximum we can support. */ -- 1.6.5.2