From: Peter Tyser Date: Mon, 09 Nov 2009 19:20:26 -0600 Subject: [U-Boot] [PATCH 3/7] 83xx/85xx/86xx: Add ECC support In-Reply-To: References: <1257809830-6088-1-git-send-email-ptyser@xes-inc.com> <1257809830-6088-4-git-send-email-ptyser@xes-inc.com> <1257813139.10661.23.camel@localhost.localdomain> <1257814918.10661.33.camel@localhost.localdomain> Message-ID: <1257816026.10661.51.camel@localhost.localdomain> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, 2009-11-10 at 09:08 +0800, Liu Dave-R63238 wrote: > > On Tue, 2009-11-10 at 08:42 +0800, Liu Dave-R63238 wrote: > > > > IIRC, 85xx cache is enabled, so when we do the ecc error inject > > > > test, What will happen before disable ecc error inject? > > > > I-fetch may get wrong instruction? > > > > If you're injecting multibit errors, yes, things could break > > down, much like a real multibit error. > > IIRC, 83xx ECC code will NOT break down when we inject multibit error. > The code will go on, u-boot also go on... What is the benefit of having such a high level of control over error injection? When do people use this feature? How often do they use it? > > > and .... > > > Because cache is enabled, data bus assume 64 bits (it is > > normal case). > > > The DDR bus will have 4-beat burst. So the error > > information will be > > > the last beat triggered, or multi-bit error at first beat....., or.. > > > It is really complex..... > > > > I believe all 4 beats would have the ecc error injected. > > > > In my opinion, the error reporting functionality of the ECC > > code is much more important than error injection. Other than > > testing code during development, when do you inject errors? > > ECC detection and reporting is useful day-to-day, in the > > field, during manufacturing tests, etc so that's where the > > emphasis of this patch is focussed. > > 83xx ECC code also has good ECC error reporting functionality, > IIRC, type ecc status... I believe the ecc status command basically just did a register dump of the ECC registers. In my opinion, the output was overly verbose and not that useful. The patch I submitted attempts to *decode* the register dump so Joe User can figure out what's really wrong with their board. Best, Peter