From: Robert Mortimer Date: Mon, 20 Dec 2010 13:09:58 +0000 (GMT) Subject: [U-Boot] Board Porting MACH_TYPE question In-Reply-To: <538775639.248.1292839367761.JavaMail.root@mailserver.xen.bluechiptechnology.co.uk> Message-ID: <1259520402.588.1292850598306.JavaMail.root@mailserver.xen.bluechiptechnology.co.uk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, I am porting a board similar to the Beagle to U-Boot. The Beagle config works but needs further pin MUXing . I have copied the Beagle board config to a new name and when compiled the binary performs as per the Beale one. My issue is when I change the line 51: gd->bd->bi_arch_number = MACH_TYPE_OMAP3_BEAGLE; in the copy of beagle.h (now re2v2.h) to 51: gd->bd->bi_arch_number = MACH_TYPE_OMAP3_RE2V2; The loader now unpacks the loaded kernel and then halts at the stage where it tries to boot it I have updated arch/arm/include/ asm /mach-types.h and include/ asm /mach-types.h. If I grep for the relevant changes/ additions I get the following:- grep -r machine_is_omap3_beagle * arch/arm/include/ asm /mach-types.h:# define machine_is_omap3_beagle() (machine_arch_type == MACH_TYPE_OMAP3_BEAGLE) arch/arm/include/ asm /mach-types.h:# define machine_is_omap3_beagle() (0) include/ asm /mach-types.h:# define machine_is_omap3_beagle() (machine_arch_type == MACH_TYPE_OMAP3_BEAGLE) include/ asm /mach-types.h:# define machine_is_omap3_beagle() (0) grep -r machine_is_omap3_re2v2 * arch/arm/include/ asm /mach-types.h:# define machine_is_omap3_re2v2() (machine_arch_type == MACH_TYPE_OMAP3_RE2V2) arch/arm/include/ asm /mach-types.h:# define machine_is_omap3_re2v2() (0) include/ asm /mach-types.h:# define machine_is_omap3_re2v2() (machine_arch_type == MACH_TYPE_OMAP3_RE2V2) include/ asm /mach-types.h:# define machine_is_omap3_re2v2() (0) grep -r machine_is_omap3_beagle * arch/arm/include/ asm /mach-types.h:# define machine_is_omap3_beagle() (machine_arch_type == MACH_TYPE_OMAP3_BEAGLE) arch/arm/include/ asm /mach-types.h:# define machine_is_omap3_beagle() (0) include/ asm /mach-types.h:# define machine_is_omap3_beagle() (machine_arch_type == MACH_TYPE_OMAP3_BEAGLE) include/ asm /mach-types.h:# define machine_is_omap3_beagle() (0) grep -r machine_is_omap3_re2v2 * arch/arm/include/ asm /mach-types.h:# define machine_is_omap3_re2v2() (machine_arch_type == MACH_TYPE_OMAP3_RE2V2) arch/arm/include/ asm /mach-types.h:# define machine_is_omap3_re2v2() (0) include/ asm /mach-types.h:# define machine_is_omap3_re2v2() (machine_arch_type == MACH_TYPE_OMAP3_RE2V2) include/ asm /mach-types.h:# define machine_is_omap3_re2v2() (0) I have defined MACH_TYPE_OMAP3_RE2V2 in arch/arm/include/ asm /mach-types.h and given it the next number I can't see where machine_arch_type is used outside of board configuration I can't see where 1546 (the Beagle number) is used either Any idea what additional work needs to be done to move to MACH_TYPE_OMAP3_RE2V2 from MACH_TYPE_OMAP3_BEAGLE? Regards Rob Blue Chip Technology Limited. Chowley Oak Lane, Tattenhall, Chester, Cheshire CH3 9EX Tel: 01829 772000 Registered in England 3110403 Vat No: GB 618 374134