From: Lucas Meneghel Rodrigues Subject: [PATCH] KVM test: Not execute build test by default Date: Tue, 1 Dec 2009 21:07:56 -0200 Message-ID: <1259708876-30251-1-git-send-email-lmr@redhat.com> Cc: kvm@vger.kernel.org, Lucas Meneghel Rodrigues To: autotest@test.kernel.org Return-path: Received: from mx1.redhat.com ([209.132.183.28]:55247 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753191AbZLAXHz (ORCPT ); Tue, 1 Dec 2009 18:07:55 -0500 Sender: kvm-owner@vger.kernel.org List-ID: Instead of trying to build KVM using one of the methods defined on the control file, use "noinstall" as the default mode, and make "noinstall" entirely skip the build test, as having "noinstall" as one of the options for the build test was making the test to run, calling the kvm preprocessor and killing VMs that could be present on the environment, an undesirable situation. This is an intermediate step before we carry over with the control file cleanup. Signed-off-by: Lucas Meneghel Rodrigues --- client/tests/kvm/control | 20 ++++++++++---------- client/tests/kvm/control.parallel | 20 ++++++++++---------- client/tests/kvm/tests/build.py | 5 +---- 3 files changed, 21 insertions(+), 24 deletions(-) diff --git a/client/tests/kvm/control b/client/tests/kvm/control index cff9965..a526cc0 100644 --- a/client/tests/kvm/control +++ b/client/tests/kvm/control @@ -75,12 +75,12 @@ params = { "name": "build", "shortname": "build", "type": "build", - "mode": "release", + #"mode": "release", #"mode": "snapshot", #"mode": "localtar", #"mode": "localsrc", #"mode": "git", - #"mode": "noinstall", + "mode": "noinstall", #"mode": "koji", ## Are we going to load modules built by this test? @@ -88,15 +88,15 @@ params = { ## be built by this test, please set load_modules to 'no', and make sure ## the kvm and kvm-[vendor] module is already loaded by the time you start ## it. - "load_modules": "no", + #"load_modules": "no", ## Install from a kvm release ("mode": "release"). You can optionally ## specify a release tag. If you omit it, the test will get the latest ## release tag available. #"release_tag": '84', - "release_dir": 'http://downloads.sourceforge.net/project/kvm/', + #"release_dir": 'http://downloads.sourceforge.net/project/kvm/', # This is the place that contains the sourceforge project list of files - "release_listing": 'http://sourceforge.net/projects/kvm/files/', + #"release_listing": 'http://sourceforge.net/projects/kvm/files/', ## Install from a kvm snapshot location ("mode": "snapshot"). You can ## optionally specify a snapshot date. If you omit it, the test will get @@ -151,11 +151,11 @@ params = { # /tmp/kvm-autotest-root/qemu is a link to your existing executable. Note that # if kvm_install is chose to run, it overwrites existing qemu and qemu-img # links to point to the newly built executables. -r = True -r = job.run_test("kvm", params=params, tag=params.get("shortname")) -if not r: - print 'kvm_installation failed ... exiting' - sys.exit(1) + +if not params.get("mode") == "noinstall": + if not job.run_test("kvm", params=params, tag=params.get("shortname")): + print 'kvm_installation failed ... exiting' + sys.exit(1) # ---------------------------------------------------------- # Get test set (dictionary list) from the configuration file diff --git a/client/tests/kvm/control.parallel b/client/tests/kvm/control.parallel index 99f6556..343f694 100644 --- a/client/tests/kvm/control.parallel +++ b/client/tests/kvm/control.parallel @@ -73,12 +73,12 @@ params = { "name": "build", "shortname": "build", "type": "build", - "mode": "release", + #"mode": "release", #"mode": "snapshot", #"mode": "localtar", #"mode": "localsrc", #"mode": "git", - #"mode": "noinstall", + "mode": "noinstall", #"mode": "koji", ## Are we going to load modules built by this test? @@ -86,15 +86,15 @@ params = { ## be built by this test, please set load_modules to 'no', and make sure ## the kvm and kvm-[vendor] module is already loaded by the time you start ## it. - "load_modules": "no", + #"load_modules": "no", ## Install from a kvm release ("mode": "release"). You can optionally ## specify a release tag. If you omit it, the test will get the latest ## release tag available. #"release_tag": '84', - "release_dir": 'http://downloads.sourceforge.net/project/kvm/', + #"release_dir": 'http://downloads.sourceforge.net/project/kvm/', # This is the place that contains the sourceforge project list of files - "release_listing": 'http://sourceforge.net/projects/kvm/files/', + #"release_listing": 'http://sourceforge.net/projects/kvm/files/', ## Install from a kvm snapshot location ("mode": "snapshot"). You can ## optionally specify a snapshot date. If you omit it, the test will get @@ -149,11 +149,11 @@ params = { # /tmp/kvm-autotest-root/qemu is a link to your existing executable. Note that # if kvm_install is chose to run, it overwrites existing qemu and qemu-img # links to point to the newly built executables. -r = True -r = job.run_test("kvm", params=params, tag=params.get("shortname")) -if not r: - print 'kvm_installation failed ... exiting' - sys.exit(1) + +if not params.get("mode") == "noinstall": + if not job.run_test("kvm", params=params, tag=params.get("shortname")): + print 'kvm_installation failed ... exiting' + sys.exit(1) # ---------------------------------------------------------- # Get test set (dictionary list) from the configuration file diff --git a/client/tests/kvm/tests/build.py b/client/tests/kvm/tests/build.py index 5fffac6..d22d59b 100644 --- a/client/tests/kvm/tests/build.py +++ b/client/tests/kvm/tests/build.py @@ -568,10 +568,7 @@ def run_build(test, params, env): srcdir = params.get("srcdir", test.srcdir) params["srcdir"] = srcdir - if install_mode == 'noinstall': - logging.info("Skipping installation") - return - elif install_mode in ['localsrc', 'localtar', 'release', 'snapshot']: + if install_mode in ['localsrc', 'localtar', 'release', 'snapshot']: installer = SourceDirInstaller(test, params) elif install_mode == 'git': installer = GitInstaller(test, params) -- 1.6.5.2