From: Peter Tyser Date: Wed, 16 Dec 2009 09:55:46 -0600 Subject: [U-Boot] [PATCH v2 0/7] 83xx/85xx/86xx ECC update In-Reply-To: <1257809830-6088-1-git-send-email-ptyser@xes-inc.com> References: <1257809830-6088-1-git-send-email-ptyser@xes-inc.com> Message-ID: <1260978946.11634.3397.camel@localhost.localdomain> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, 2009-11-09 at 17:37 -0600, Peter Tyser wrote: > This patch series is similar to the "8xxx: Add 'ecc' command" recently > submitted but has the following changes: > - Supports 83xx/85xx/86xx, previously 83xx wasn't supported > - Removes the old 83xx ecc command and replaces it with this new > implementation > - Places the ecc code in a new drivers/edac directory instead of > in cpu/8xxx > - The ecc command is enabled via CONFIG_EDAC_FSL_ECC instead of > CONFIG_CMD_ECC > > I compile tested on 83xx, but don't have any 83xx boards to test > on, so it'd be much appreciated if someone else could give it a shot. > If people don't want to actually ground signals on their boards, > they can inject an error then modify memory or perform a mtest to > simulate ecc errors. Ping...