Return-path: Received: from cpc5-sgyl16-0-0-cust107.sgyl.cable.virginmedia.com ([77.99.223.108]:55075 "EHLO localhost.localdomain" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1756440Ab0BOUIc convert rfc822-to-8bit (ORCPT ); Mon, 15 Feb 2010 15:08:32 -0500 Received: from localhost.localdomain (localhost.localdomain [127.0.0.1]) by localhost.localdomain (8.14.3/8.14.3) with ESMTP id o1FKqJX8006094 for ; Mon, 15 Feb 2010 20:52:19 GMT Received: (from msar@localhost) by localhost.localdomain (8.14.3/8.14.3/Submit) id o1FKqJfn006092 for linux-media@vger.kernel.org; Mon, 15 Feb 2010 20:52:19 GMT Subject: USB TV stick with 18271HD-C2 chip From: Michael Robb To: linux-media@vger.kernel.org Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8BIT Date: Mon, 15 Feb 2010 20:52:18 +0000 Message-ID: <1266267138.5956.1.camel@localhost.localdomain> Mime-Version: 1.0 Sender: linux-media-owner@vger.kernel.org List-ID: Hello, I am trying to get a USB TV stick to work: with Linux - Inside the case, it has a NXP TDA18271HDC2 tuning chip, but no decoder. Shows up as a "Cali TV Card" with idVendor 0x438, idProduct 0xac14 Three devices get created under major 189 minor 6 /dev/char/189:6 DEVPATH=/devices/pci0000:00/0000:00:03.3/usb1/1-1 DEVPATH=/devices/pci0000:00/0000:00:03.3/usb1/1-1/1-1:1.0 I figure that it requires the 'tda18271' driver to work (v4l-dvb/tda18271-common.c ...), but haven't had much such success trying to use modprobe and lsmod. The product data sheet for the chip is at: http://www.nxp.com/documents/data_sheet/TDA18271HD.pdf Can anyone help? Cheers, Michael