Return-path: Received: from mail-fx0-f219.google.com ([209.85.220.219]:63263 "EHLO mail-fx0-f219.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S965208Ab0BZRHv (ORCPT ); Fri, 26 Feb 2010 12:07:51 -0500 Received: by fxm19 with SMTP id 19so307868fxm.21 for ; Fri, 26 Feb 2010 09:07:49 -0800 (PST) Subject: Re: How to add DVB-S2 support to firedtv? From: Beat Michel Liechti To: Henrik Kurelid , Stefan Richter , linux-media@vger.kernel.org, Henrik Kurelid , Ben Backx In-Reply-To: References: <4B782CCA.3010903@s5r6.in-berlin.de> Content-Type: text/plain; charset="UTF-8" Date: Fri, 26 Feb 2010 18:07:40 +0100 Message-ID: <1267204060.3060.5.camel@darkscan11> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: Hi there I own a FireDTV S2 and I'm willing to invest some time. I poked around in the driver code previously and I might do some coding given that I have access to the required technical information. As far as I know Digital Everywhere is out of business - does this mean that the NDAs are no longer in effect and that someone could give me the technical documentation required? Cheerio Beat On Thu, 2010-02-18 at 11:04 +0100, Henrik Kurelid wrote: > Hi, > > Regarding the documentation and code: > From a quick glance, the LNB/QPSK2 code follows the documentation fairly good. > I guess it could do with a deeper check (I could see that at least the FEC switch case does seems to have some invalid values) but I would prefer > that this is done by someone that actually has a DVB-S(2) card. > > Regards, > Henrik > > > Hi all, > > > > what steps need to be taken to get DVB-S2 support into the firedtv > > driver? (The status is, as far as I understood: FireDTV S2 and Floppy > > DTV S2 devices recognize HD channels during channel scan but cannot tune > > to them. FireDTV C/CI DVB-C boxes however tune and play back HD > > channels just fine.) > > > > I suppose the frontend needs to be extended for s2api. Was there a > > respective conversion in another DVB driver that can serve as a good > > coding example? > > > > Is documentation from Digital Everywhere required regarding the > > vendor-specific AV/C requests (LNB_CONTROL? TUNE_QPSK2?) or is the > > current driver code enough to connect the dots? > > > > Is the transport stream different from DVB-C HD streams so that changes > > to the isochronous I/O part would be required? > > -- > > Stefan Richter > > -=====-==-=- --=- -===- > > http://arcgraph.de/sr/ > > >