From: Ben Dooks Subject: [PATCH 11/23] ARM: S3C2410: Change s3c2410_gpio_pullupl(x, 1) to use s3c_gpio_cfgpull() Date: Fri, 7 May 2010 08:15:33 +0900 Message-ID: <1273187745-6566-12-git-send-email-ben-linux@fluff.org> References: <1273187745-6566-1-git-send-email-ben-linux@fluff.org> Return-path: Received: from [121.136.51.148] ([121.136.51.148]:60630 "EHLO ben-laptop" rhost-flags-FAIL-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1753736Ab0EFXQF (ORCPT ); Thu, 6 May 2010 19:16:05 -0400 In-Reply-To: <1273187745-6566-1-git-send-email-ben-linux@fluff.org> Sender: linux-samsung-soc-owner@vger.kernel.org List-Id: linux-samsung-soc@vger.kernel.org To: linux-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org Cc: Ben Dooks Start moving code that is using the old s3c2410_gpio API to using the newer s3c_gpio variants by finding all the usages of s3c2410_gpio_pullup() which disable the pin's pull up and replacing them. sed 's/s3c2410_gpio_pullup\(.*\), 1/s3c_gpio_cfgpull\1, S3C_GPIO_PULL_NONE/g' Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/h1940-bluetooth.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c index 6d06b7e..171a7c3 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -70,13 +70,13 @@ static int __devinit h1940bt_probe(struct platform_device *pdev) /* Configures BT serial port GPIOs */ s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0); - s3c2410_gpio_pullup(S3C2410_GPH(0), 1); + s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE); s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_pullup(S3C2410_GPH(1), 1); + s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE); s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0); - s3c2410_gpio_pullup(S3C2410_GPH(2), 1); + s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE); s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0); - s3c2410_gpio_pullup(S3C2410_GPH(3), 1); + s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE); rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH, -- 1.7.0.4