From: Kumar Gala Date: Wed, 30 Jun 2010 04:48:47 -0500 Subject: [U-Boot] [PATCH] powerpc/85xx: Add support for link stack & STAC on e5500 In-Reply-To: <1277891327-24506-1-git-send-email-galak@kernel.crashing.org> References: <1277891327-24506-1-git-send-email-galak@kernel.crashing.org> Message-ID: <1277891327-24506-2-git-send-email-galak@kernel.crashing.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The e5500 has a link register stack and segment target address cache. Its safe to enable these bits on older e500 cores as the bits are implemented in the register. Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/processor.h | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-) diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 9ec319a..844552c 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -534,9 +534,11 @@ #define SPRN_MCSRR0 0x23a /* Machine Check Save and Restore Register 0 */ #define SPRN_MCSRR1 0x23b /* Machine Check Save and Restore Register 1 */ #define SPRN_BUCSR 0x3f5 /* Branch Control and Status Register */ +#define BUCSR_STAC_EN 0x01000000 /* Segment target addr cache enable */ +#define BUCSR_LS_EN 0x00400000 /* Link stack enable */ #define BUCSR_BBFI 0x00000200 /* Branch buffer flash invalidate */ #define BUCSR_BPEN 0x00000001 /* Branch prediction enable */ -#define BUCSR_ENABLE (BUCSR_BBFI|BUCSR_BPEN) +#define BUCSR_ENABLE (BUCSR_STAC_EN|BUCSR_LS_EN|BUCSR_BBFI|BUCSR_BPEN) #define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */ #define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */ #define SPRN_PID1 0x279 /* Process ID Register 1 */ -- 1.6.0.6