Return-path: Received: from proofpoint-cluster.metrocast.net ([65.175.128.136]:23246 "EHLO proofpoint-cluster.metrocast.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752566Ab0ICBgT (ORCPT ); Thu, 2 Sep 2010 21:36:19 -0400 Subject: Re: cx23885: Message Signaled Interrupts issue From: Andy Walls To: "Igor M. Liplianin" Cc: linux-media@vger.kernel.org In-Reply-To: <201008310122.09742.liplianin@me.by> References: <201008310122.09742.liplianin@me.by> Content-Type: text/plain; charset="UTF-8" Date: Thu, 02 Sep 2010 21:36:09 -0400 Message-ID: <1283477769.17527.17.camel@morgan.silverblock.net> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit List-ID: Sender: Mauro Carvalho Chehab On Tue, 2010-08-31 at 01:22 +0300, Igor M. Liplianin wrote: > I was wondering, if someone tried 2.6.36-rc kernels with PCIe MSI enabled. > With TeVii s470 after rmmod cx23885 && insmod cx23885 then szap some channel I have 'No irq > handler for vector' message. After reboot it's OK. > I think it's A/V core interrupts involved. Hmm. A/V core interrupts aren't turned on for IR by default for the TeVii S470 (you have to use a module option to turn on the IR for the TeVii S470). I can't recall if Steven's changes enabled A/V core interrupts. I'll have to look sometime this weekend, if the hurricane doesn't knock out the electricity. Regards, Andy > igor@useri:~$ szap -l10750 bridge-tv -p > reading channels from file '/home/igor/.szap/channels.conf' > zapping to 5 'bridge-tv': > sat 1, frequency = 12303 MHz H, symbolrate 27500000, vpid = 0x0134, apid = 0x0100 sid = 0x003b > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > > Message from syslogd@localhost at Tue Aug 31 00:55:32 2010 ... > localhost kernel: do_IRQ: 1.137 No irq handler for vector (irq -1) > > Message from syslogd@localhost at Tue Aug 31 00:55:33 2010 ... > localhost kernel: do_IRQ: 0.137 No irq handler for vector (irq -1) > > Message from syslogd@localhost at Tue Aug 31 00:55:34 2010 ... > localhost kernel: do_IRQ: 1.137 No irq handler for vector (irq -1) > > Message from syslogd@localhost at Tue Aug 31 00:55:35 2010 ... > localhost kernel: do_IRQ: 0.137 No irq handler for vector (irq -1) > > > It is similar issue with NetUP DVB-S2 , but CI involved through GPIO interrupts. > Compro e650f works well, though it uses neither A/V core interrupts nor GPIO interrupts. > >