Return-path: Received: from devils.ext.ti.com ([198.47.26.153]:51973 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750841Ab0IDIlR (ORCPT ); Sat, 4 Sep 2010 04:41:17 -0400 From: Archit Taneja To: hvaibhav@ti.com Cc: linux-omap@vger.kernel.org, linux-media@vger.kernel.org, Archit Taneja Subject: [PATCH 0/2] V4L/DVB: OMAP_VOUT: Allow omap_vout to build without VRFB Date: Sat, 4 Sep 2010 14:11:43 +0530 Message-Id: <1283589705-6723-1-git-send-email-archit@ti.com> List-ID: Sender: Mauro Carvalho Chehab This lets omap_vout driver build and run without VRFB. It works along the lines of the following patch series: OMAP: DSS2: OMAPFB: Allow FB_OMAP2 to build without VRFB https://patchwork.kernel.org/patch/105371/ A variable rotation_type is introduced in omapvideo_info like the way in omapfb_info to make both vrfb and non vrfb rotation possible. Since VRFB is tightly coupled with the omap_vout driver, a handful of vrfb-specific functions have been defined and placed in omap_vout_vrfb.c This series applies along with the previously submitted patch: https://patchwork.kernel.org/patch/146401/ Archit Taneja (2): V4L/DVB: OMAP_VOUT: Create a seperate vrfb functions library V4L/DVB: OMAP_VOUT: Use rotation_type to choose between vrfb and sdram rotation drivers/media/video/omap/Kconfig | 1 - drivers/media/video/omap/Makefile | 1 + drivers/media/video/omap/omap_vout.c | 502 ++++++----------------------- drivers/media/video/omap/omap_vout_vrfb.c | 417 ++++++++++++++++++++++++ drivers/media/video/omap/omap_vout_vrfb.h | 40 +++ drivers/media/video/omap/omap_voutdef.h | 26 ++ 6 files changed, 582 insertions(+), 405 deletions(-) create mode 100644 drivers/media/video/omap/omap_vout_vrfb.c create mode 100644 drivers/media/video/omap/omap_vout_vrfb.h