From: tom.leiming@gmail.com Subject: [RESEND/PATCH 2/6] USB: musb-gadget: fix bulk IN infinite hangs in double buffer case Date: Tue, 7 Sep 2010 23:23:30 +0800 Message-ID: <1283873014-32511-3-git-send-email-tom.leiming@gmail.com> References: <1283873014-32511-1-git-send-email-tom.leiming@gmail.com> Return-path: In-Reply-To: <1283873014-32511-1-git-send-email-tom.leiming@gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: greg@kroah.com Cc: linux-usb@vger.kernel.org, linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, Ming Lei , David Brownell , Felipe Balbi , Anand Gadiyar , Mike Frysinger , Sergei Shtylyov List-Id: linux-omap@vger.kernel.org From: Ming Lei This patch fixes one infinite hang of bulk IN transfer in double buffer case, the hang can be observed easily by test #6 of usbtest if musb is configured as g_zero and fifo mode 3 is taken to enable double fifo. In fact, the patch only removes the check for non-empty fifo before loading data from new request into fifo since the check is not correct: -in double buffer case, fifo may accommodate more than one packet, even though it has contained one packet already and is non-empty -since last DMA is completed before calling musb_g_tx, it is sure that fifo may accommodate at least one packet Without applying the patch, new requst enqueued from .complte may not have a chance to be loaded into fifo, then will never be completed and cause infinite hangs. With the patch, on my beagle B5, test#6(queued bulk in) can be passed and test result may go beyond 33Mbyte/s if musb is configured as g_zero and fifo mode 3 is taken, follows the test command: #testusb -D DEV_NAME -c 1024 -t 6 -s 32768 -g 8 [1] [1], -source of testusb : tools/usb/testusb.c under linux kernel; Signed-off-by: Ming Lei Acked-by: Anand Gadiyar Cc: David Brownell Cc: Felipe Balbi Cc: Anand Gadiyar Cc: Mike Frysinger Cc: Sergei Shtylyov --- drivers/usb/musb/musb_gadget.c | 12 ------------ 1 files changed, 0 insertions(+), 12 deletions(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index de0ca90..f206c94 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -504,18 +504,6 @@ void musb_g_tx(struct musb *musb, u8 epnum) /* ... or if not, then complete it. */ musb_g_giveback(musb_ep, request, 0); - /* - * Kickstart next transfer if appropriate; - * the packet that just completed might not - * be transmitted for hours or days. - * REVISIT for double buffering... - * FIXME revisit for stalls too... - */ - musb_ep_select(mbase, epnum); - csr = musb_readw(epio, MUSB_TXCSR); - if (csr & MUSB_TXCSR_FIFONOTEMPTY) - return; - request = musb_ep->desc ? next_request(musb_ep) : NULL; if (!request) { DBG(4, "%s idle now\n", -- 1.6.2.5