From: Cyril Chemparathy Subject: [PATCH v2 0/5] add tnetv107x input drivers Date: Thu, 16 Sep 2010 15:54:39 -0400 Message-ID: <1284666884-10374-1-git-send-email-cyril@ti.com> Return-path: Received: from devils.ext.ti.com ([198.47.26.153]:39675 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754624Ab0IPTyu (ORCPT ); Thu, 16 Sep 2010 15:54:50 -0400 Sender: linux-input-owner@vger.kernel.org List-Id: linux-input@vger.kernel.org To: linux-input@vger.kernel.org, davinci-linux-open-source@linux.davincidsp.com Cc: shubhrajyoti@ti.com, dmitry.torokhov@gmail.com, khilman@deeprootsystems.com, Cyril Chemparathy Texas Instruments' TNETV107X is an ARM1176 based SoC, with on-chip touchscreen and keypad controllers. This patch series adds drivers for these controllers. Changes between v1 and v2: 1. Cleaned up platform data needs by reusing matrix keypad pdata 2. Eliminated calibration code from touch driver 3. Relocated h/w init code to open and close 4. Other minor cleanups Cyril Chemparathy (5): input: add driver for tnetv107x on-chip keypad controller davinci: add tnetv107x keypad platform device davinci: add keypad config for tnetv107x evm board input: add driver for tnetv107x touchscreen controller davinci: add tnetv107x touchscreen platform device arch/arm/mach-davinci/board-tnetv107x-evm.c | 56 ++++ arch/arm/mach-davinci/devices-tnetv107x.c | 50 +++ arch/arm/mach-davinci/include/mach/tnetv107x.h | 3 + drivers/input/keyboard/Kconfig | 9 + drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/tnetv107x-keypad.c | 329 +++++++++++++++++++ drivers/input/touchscreen/Kconfig | 9 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/tnetv107x-ts.c | 401 ++++++++++++++++++++++++ 9 files changed, 859 insertions(+), 0 deletions(-) create mode 100644 drivers/input/keyboard/tnetv107x-keypad.c create mode 100644 drivers/input/touchscreen/tnetv107x-ts.c