From: Jarkko Nikula Subject: [PATCH] ASoC: tlv320aic3x: Add virtual output pin Detection Date: Fri, 17 Sep 2010 14:39:01 +0300 Message-ID: <1284723541-21813-1-git-send-email-jhnikula@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mail-ey0-f179.google.com (mail-ey0-f179.google.com [209.85.215.179]) by alsa0.perex.cz (Postfix) with ESMTP id 1242A24470 for ; Fri, 17 Sep 2010 13:42:32 +0200 (CEST) Received: by eye27 with SMTP id 27so1042877eye.38 for ; Fri, 17 Sep 2010 04:42:31 -0700 (PDT) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: alsa-devel@alsa-project.org Cc: Mark Brown , Liam Girdwood List-Id: alsa-devel@alsa-project.org Purpose of this virtual Detection pin is to keep codec bias on whenever the GPIO or jack detection features are needed. Jack detection needs a mic bias so machine drivers can construct a following route for instance for keeping the path and codec bias on: "Input Jack" -> "Mic Bias xV" -> "Detection" -> detection block inside codec. For the GPIO the machine driver can force the pin on with snd_soc_dapm_force_enable_pin. Signed-off-by: Jarkko Nikula --- PLL is activated when in SND_SOC_BIAS_PREPARE or _ON so it could be running but I have a vague impression that it's active only when ADC or DAC is on. I don't have at the moment possibility to measure it and don't want to move it to DAPM either before doing some oscilloscope and pop & clicks measurements. Current consumption anyway doesn't differ between standby and on when there is no active stream and other widgets are off. --- sound/soc/codecs/tlv320aic3x.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-) diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index 7b5f159..6190351 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -605,6 +605,14 @@ static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = { SND_SOC_DAPM_INPUT("LINE1R"), SND_SOC_DAPM_INPUT("LINE2L"), SND_SOC_DAPM_INPUT("LINE2R"), + + /* + * Virtual output pin to detection block inside codec. This can be + * used to keep codec bias on if gpio or detection features are needed. + * Force pin on or construct a path with an input jack and mic bias + * widgets. + */ + SND_SOC_DAPM_OUTPUT("Detection"), }; static const struct snd_soc_dapm_widget aic3007_dapm_widgets[] = { -- 1.7.1