Return-Path: Received: from sog-mx-1.v43.ch3.sourceforge.com ([172.29.43.191] helo=mx.sourceforge.net) by sfs-ml-1.v29.ch3.sourceforge.com with esmtp (Exim 4.69) (envelope-from ) id 1P2fF5-0008I3-Ei for ltp-list@lists.sourceforge.net; Mon, 04 Oct 2010 07:13:47 +0000 Received: from e1.ny.us.ibm.com ([32.97.182.141]) by sog-mx-1.v43.ch3.sourceforge.com with esmtps (TLSv1:AES256-SHA:256) (Exim 4.69) id 1P2fF2-0006mM-WB for ltp-list@lists.sourceforge.net; Mon, 04 Oct 2010 07:13:47 +0000 Received: from d01relay03.pok.ibm.com (d01relay03.pok.ibm.com [9.56.227.235]) by e1.ny.us.ibm.com (8.14.4/8.13.1) with ESMTP id o9476gc3025901 for ; Mon, 4 Oct 2010 03:06:42 -0400 Received: from d01av01.pok.ibm.com (d01av01.pok.ibm.com [9.56.224.215]) by d01relay03.pok.ibm.com (8.13.8/8.13.8/NCO v10.0) with ESMTP id o947DdwY351248 for ; Mon, 4 Oct 2010 03:13:39 -0400 Received: from d01av01.pok.ibm.com (loopback [127.0.0.1]) by d01av01.pok.ibm.com (8.14.4/8.13.1/NCO v10.0 AVout) with ESMTP id o947Ddhw023794 for ; Mon, 4 Oct 2010 03:13:39 -0400 From: Subrata Modak In-Reply-To: <1285689961.11429.12.camel@subratamodak.linux.ibm.com> References: <4C85A88D.10700@cn.fujitsu.com> <1285689961.11429.12.camel@subratamodak.linux.ibm.com> Date: Mon, 04 Oct 2010 12:43:38 +0530 Message-Id: <1286176418.4882.3.camel@subratamodak.linux.ibm.com> Mime-Version: 1.0 Subject: Re: [LTP] [PATCH v2] Add ftrace-stress-test to LTP Reply-To: subrata@linux.vnet.ibm.com List-Id: Linux Test Project General Discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Errors-To: ltp-list-bounces@lists.sourceforge.net To: Li Zefan Cc: ltp-list@lists.sourceforge.net Hi Li, Can you please address the following queries/issues ? Regards-- Subrata On Tue, 2010-09-28 at 21:35 +0530, Subrata Modak wrote: > On Tue, 2010-09-07 at 10:50 +0800, Li Zefan wrote: > > We test ftrace by forking processes to simultaneously and > > constantly read/write different tracing files in debugfs > > and procfs. This stress test aims at revealing races in > > various corner cases > > > > The test will be skipped if the kernel is older than 2.6.34, > > mainly because it can crash old kernels. > > > > The test will run by default and will run for 90 seconds. > > > > To run this test only: > > > > # ./runltp -f tracing > > > > > > Changelog for v2: > > > > - Addressed the comments from Garrett > > > > Signed-off-by: Li Zefan > > Sorry for responding late. I gave a try to these tests and has my > following observations: > > You said that the tests can run on kernels above 2.6.34 without issues. > But, i ran them on stable 2.6.35.4 and still found kernel panics. I > built kernel 2.6.35.4 on my existing Fedora 13 PowerPC box. > > # uname -a > Linux 2.6.35.4 #2 SMP Tue Sep 28 16:07:27 IST 2010 ppc64 ppc64 ppc64 > GNU/Linux > # cat /etc/issue > Fedora release 13 (Goddard) > Kernel \r on an \m (\l) > > When i ran the tests: > Running tests....... > <<>> > tag=ftrace-stress-test stime=1285684343 > cmdline="ftrace_stress_test.sh 90" > contacts="" > analysis=exit > <<>> > incrementing stop > Ftrace Stress Test Begin > ... > > The following panic and system reboot was observed on mu Serial console: > ======================================================================== > Unable to handle kernel paging request for data at address > 0xbffffe4007fc8040 > Unable to handle kernel paging request for data at address > 0xbffffe4007fc8040 > Faulting instruction address: 0xc00000000010f4a8 > Oops: Kernel access of bad area, sig: 11 [#1] > SMP NR_CPUS=128 NUMA pSeries > last sysfs > file: /sys/devices/vio/30000002/host0/target0:0:2/0:0:2:0/model > Modules linked in: sunrpc ipv6 uinput ehea ibmvscsic scsi_transport_srp > scsi_tgt [last unloaded: scsi_wait_scan] > NIP: c00000000010f4a8 LR: c00000000010f30c CTR: c00000000020f698 > REGS: c0000000dafa70a0 TRAP: 0300 Tainted: G W (2.6.35.4) > MSR: 8000000000001032 CR: 48002048 XER: 00000000 > DAR: bffffe4007fc8040, DSISR: 0000000040000000 > TASK = c0000000daf950d0[9] 'migration/2' THREAD: c0000000dafa4000 CPU: 2 > GPR00: 0000000000009c35 c0000000dafa7320 c000000001735d40 > 0000000000000000 > GPR04: c00000000010f308 c0000000dafa7278 0000000000000000 > 0000000000009c34 > GPR08: fffffe4000000000 c0000000de003580 bffffe4007fc8000 > c000000001033720 > GPR12: 0000000028002042 c000000007fc8e00 0000000006e3fa78 > 00000000005f3000 > GPR16: c0000000dafa77d0 c000000001c852b0 c0000000dafa77c0 > 0000000000000000 > GPR20: 0000000000000000 c000000001813350 7fffffffffffffff > c0000000017dea80 > GPR24: 0000000000c55000 c0000000daeabc00 0000000001dcff22 > c0000000daf950d0 > GPR28: c000000001c87780 c0000000017cea80 c0000000016a5df0 > c0000000dafa7320 > NIP [c00000000010f4a8] .update_curr_rt+0x1e8/0x538 > LR [c00000000010f30c] .update_curr_rt+0x4c/0x538 > Call Trace: > [c0000000dafa7320] [c00000000010f30c] .update_curr_rt+0x4c/0x538 > (unreliable) > [c0000000dafa73f0] [c00000000010f848] .task_tick_rt+0x50/0x1a4 > [c0000000dafa7490] [c000000000121468] .scheduler_tick+0x2ac/0x684 > [c0000000dafa7550] [c00000000014c2c8] .update_process_times+0xd0/0x120 > [c0000000dafa75f0] [c00000000018b76c] .tick_sched_timer+0x128/0x1a8 > [c0000000dafa76a0] [c000000000174324] .__run_hrtimer+0x28c/0x3d8 > [c0000000dafa7750] [c000000000174960] .hrtimer_interrupt+0x18c/0x3c8 > [c0000000dafa7860] [c000000000047c00] .timer_interrupt+0x40c/0x598 > [c0000000dafa7900] [c000000000003728] decrementer_common+0x128/0x180 > --- Exception: 901 at .raw_local_irq_restore+0x168/0x194 > LR = .stop_machine_cpu_stop+0x2a4/0x2f4 > [c0000000dafa7bf0] [c0000000dafa7cb0] 0xc0000000dafa7cb0 (unreliable) > [c0000000dafa7c90] [c0000000001d66c8] .stop_machine_cpu_stop+0x2a4/0x2f4 > [c0000000dafa7d50] [c0000000001d6238] .cpu_stopper_thread+0x1dc/0x3c8 > [c0000000dafa7ec0] [c00000000016be28] .kthread+0x124/0x13c > [c0000000dafa7f90] [c00000000004e270] .kernel_thread+0x54/0x70 > Instruction dump: > e9290050 1d080700 f80b5888 48000038 e95e8010 e97e8000 e94a0000 e8eb5890 > 7d4a4214 38070001 f80b5890 e9690020 7c0b502a 7c00d214 > 7c0b512a > Faulting instruction address: 0xc00000000010f4a8 > Oops: Kernel access of bad area, sig: 11 [#2] > SMP NR_CPUS=128 NUMA pSeries > last sysfs > file: /sys/devices/vio/30000002/host0/target0:0:2/0:0:2:0/model > Modules linked in: sunrpc ipv6 uinput ehea ibmvscsic scsi_transport_srp > scsi_tgt [last unloaded: scsi_wait_scan] > NIP: c00000000010f4a8 LR: c00000000010f30c CTR: c00000000020f698 > REGS: c0000000dafc30a0 TRAP: 0300 Tainted: G D W (2.6.35.4) > MSR: 8000000000001032 CR: 48002048 XER: 00000000 > DAR: bffffe4007fc8040, DSISR: 0000000040000000 > TASK = c0000000dafb35e0[12] 'migration/3' THREAD: c0000000dafc0000 CPU: > 3 > GPR00: 0000000000009c34 c0000000dafc3320 c000000001735d40 > 0000000000000000 > GPR04: c00000000010f308 c0000000dafc3278 0000000000000000 > 0000000000009c33 > GPR08: fffffe4000000000 c0000000de003580 bffffe4007fc8000 > c000000001033720 > GPR12: c0000000d1725300 c000000007fc9500 0000000006e3fa78 > 00000000005f3000 > GPR16: c0000000dafc37d0 c000000001cc52b0 c0000000dafc37c0 > 0000000000000000 > GPR20: 0000000000000000 c000000001813350 7fffffffffffffff > c0000000017dea80 > GPR24: 0000000000c95000 c0000000dafb8800 0000000001daff3e > c0000000dafb35e0 > GPR28: c000000001cc7780 c0000000017cea80 c0000000016a5df0 > c0000000dafc3320 > NIP [c00000000010f4a8] .update_curr_rt+0x1e8/0x538 > LR [c00000000010f30c] .update_curr_rt+0x4c/0x538 > Call Trace: > [c0000000dafc3320] [c00000000010f30c] .update_curr_rt+0x4c/0x538 > (unreliable) > [c0000000dafc33f0] [c00000000010f848] .task_tick_rt+0x50/0x1a4 > [c0000000dafc3490] [c000000000121468] .scheduler_tick+0x2ac/0x684 > [c0000000dafc3550] [c00000000014c2c8] .update_process_times+0xd0/0x120 > [c0000000dafc35f0] [c00000000018b76c] .tick_sched_timer+0x128/0x1a8 > [c0000000dafc36a0] [c000000000174324] .__run_hrtimer+0x28c/0x3d8 > [c0000000dafc3750] [c000000000174960] .hrtimer_interrupt+0x18c/0x3c8 > [c0000000dafc3860] [c000000000047c00] .timer_interrupt+0x40c/0x598 > [c0000000dafc3900] [c000000000003728] decrementer_common+0x128/0x180 > --- Exception: 901 at .raw_local_irq_restore+0x168/0x194 > LR = .stop_machine_cpu_stop+0x2a4/0x2f4 > [c0000000dafc3bf0] [c0000000dafc3cb0] 0xc0000000dafc3cb0 (unreliable) > [c0000000dafc3c90] [c0000000001d66c8] .stop_machine_cpu_stop+0x2a4/0x2f4 > [c0000000dafc3d50] [c0000000001d6238] .cpu_stopper_thread+0x1dc/0x3c8 > [c0000000dafc3ec0] [c00000000016be28] .kthread+0x124/0x13c > [c0000000dafc3f90] [c00000000004e270] .kernel_thread+0x54/0x70 > Instruction dump: > e9290050 1d080700 f80b5888 48000038 e95e8010 e97e8000 e94a0000 e8eb5890 > 7d4a4214 38070001 f80b5890 e9690020 7c0b502a 7c00d214 > 7c0b512a > Kernel panic - not syncing: Fatal exception in interrupt > Call Trace: > [c0000000dafa6ce0] [c00000000001d068] .show_stack+0x148/0x384 > (unreliable) > [c0000000dafa6dc0] [c000000000bdd208] .dump_stack+0x50/0x78 > [c0000000dafa6e50] [c000000000bdd328] .panic+0xf8/0x26c > [c0000000dafa6ef0] [c00000000004a2d8] .die+0x434/0x494 > [c0000000dafa6fa0] [c0000000000679a8] .bad_page_fault+0x154/0x184 > [c0000000dafa7030] [c000000000005704] handle_page_fault+0x3c/0x74 > --- Exception: 300 at .update_curr_rt+0x1e8/0x538 > LR = .update_curr_rt+0x4c/0x538 > [c0000000dafa73f0] [c00000000010f848] .task_tick_rt+0x50/0x1a4 > [c0000000dafa7490] [c000000000121468] .scheduler_tick+0x2ac/0x684 > [c0000000dafa7550] [c00000000014c2c8] .update_process_times+0xd0/0x120 > [c0000000dafa75f0] [c00000000018b76c] .tick_sched_timer+0x128/0x1a8 > [c0000000dafa76a0] [c000000000174324] .__run_hrtimer+0x28c/0x3d8 > [c0000000dafa7750] [c000000000174960] .hrtimer_interrupt+0x18c/0x3c8 > [c0000000dafa7860] [c000000000047c00] .timer_interrupt+0x40c/0x598 > [c0000000dafa7900] [c000000000003728] decrementer_common+0x128/0x180 > --- Exception: 901 at .raw_local_irq_restore+0x168/0x194 > LR = .stop_machine_cpu_stop+0x2a4/0x2f4 > [c0000000dafa7bf0] [c0000000dafa7cb0] 0xc0000000dafa7cb0 (unreliable) > Kernel panic - not syncing: Fatal exception in interrupt > [c0000000dafa7c90] [c0000000001d66c8] .stop_machine_cpu_stop+0x2a4/0x2f4 > [c0000000dafa7d50] [c0000000001d6238] .cpu_stopper_thread+0x1dc/0x3c8 > [c0000000dafa7ec0] [c00000000016be28] .kthread+0x124/0x13c > [c0000000dafa7f90] [c00000000004e270] .kernel_thread+0x54/0x70 > Call Trace: > [c0000000dafc2ce0] [c00000000001d068] .show_stack+0x148/0x384 > (unreliable) > [c0000000dafc2dc0] [c000000000bdd208] .dump_stack+0x50/0x78 > [c0000000dafc2e50] [c000000000bdd328] .panic+0xf8/0x26c > [c0000000dafc2ef0] [c00000000004a2d8] .die+0x434/0x494 > [c0000000dafc2fa0] [c0000000000679a8] .bad_page_fault+0x154/0x184 > [c0000000dafc3030] [c000000000005704] handle_page_fault+0x3c/0x74 > --- Exception: 300 at .update_curr_rt+0x1e8/0x538 > LR = .update_curr_rt+0x4c/0x538 > [c0000000dafc33f0] [c00000000010f848] .task_tick_rt+0x50/0x1a4 > [c0000000dafc3490] [c000000000121468] .scheduler_tick+0x2ac/0x684 > [c0000000dafc3550] [c00000000014c2c8] .update_process_times+0xd0/0x120 > [c0000000dafc35f0] [c00000000018b76c] .tick_sched_timer+0x128/0x1a8 > [c0000000dafc36a0] [c000000000174324] .__run_hrtimer+0x28c/0x3d8 > [c0000000dafc3750] [c000000000174960] .hrtimer_interrupt+0x18c/0x3c8 > [c0000000dafc3860] [c000000000047c00] .timer_interrupt+0x40c/0x598 > [c0000000dafc3900] [c000000000003728] decrementer_common+0x128/0x180 > --- Exception: 901 at .raw_local_irq_restore+0x168/0x194 > LR = .stop_machine_cpu_stop+0x2a4/0x2f4 > [c0000000dafc3bf0] [c0000000dafc3cb0] 0xc0000000dafc3cb0 (unreliable) > [c0000000dafc3c90] [c0000000001d66c8] .stop_machine_cpu_stop+0x2a4/0x2f4 > [c0000000dafc3d50] [c0000000001d6238] .cpu_stopper_thread+0x1dc/0x3c8 > [c0000000dafc3ec0] [c00000000016be28] .kthread+0x124/0x13c > [c0000000dafc3f90] [c00000000004e270] .kernel_thread+0x54/0x70 > RTAS: event: 29, Type: Platform Error, Severity: 2 > ibm,os-term call failed -1 > Rebooting in 180 seconds.. > RTAS: event: 30, Type: Platform Error, Severity: 2 > ibm,os-term call failed -1 > Rebooting in 180 seconds.. > ======================================================================== > > Can you please address the following things: > 1. I was not sure which particular CONFIG options to enable when > building kernel to enable tracing options that these tests would > require. So, i had enabled most of them while building the > kernel. Please see the attached config file. In your next > patch[v3], can you please a bit of documentation on this front > of what other system requirements are needed to execute these > tests, including the kernel CONFIG options to be enabled, > 2. So, going by your description, the tests should run on kernel > greater than 2.6.34. But, on kernel 2.6.35.4 it still creates > kernel panic. So, is this > I. a test case issues ? > II. or, real kernel bug which has not yet being addressed > till now ? > > Regards-- > Subrata > > > --- > > runltp | 3 +- > > runtest/tracing | 2 + > > testcases/kernel/Makefile | 2 +- > > testcases/kernel/tracing/Makefile | 5 + > > .../kernel/tracing/ftrace_stress_test/Makefile | 7 + > > .../ftrace_stress_test/ftrace_get_page_size.c | 10 + > > .../ftrace_stress/ftrace_buffer_size.sh | 43 ++++ > > .../ftrace_stress/ftrace_current_tracer.sh | 34 +++ > > .../ftrace_stress/ftrace_ftrace_enabled.sh | 39 ++++ > > .../ftrace_stress/ftrace_profile_enabled.sh | 50 ++++ > > .../ftrace_stress/ftrace_set_event.sh | 44 ++++ > > .../ftrace_stress/ftrace_set_ftrace_pid.sh | 44 ++++ > > .../ftrace_stress/ftrace_stack_max_size.sh | 39 ++++ > > .../ftrace_stress/ftrace_stack_trace.sh | 46 ++++ > > .../ftrace_stress/ftrace_trace.sh | 27 +++ > > .../ftrace_stress/ftrace_trace_clock.sh | 46 ++++ > > .../ftrace_stress/ftrace_trace_options.sh | 42 ++++ > > .../ftrace_stress/ftrace_trace_pipe.sh | 52 +++++ > > .../ftrace_stress/ftrace_trace_stat.sh | 45 ++++ > > .../ftrace_stress/ftrace_tracing_enabled.sh | 39 ++++ > > .../ftrace_stress/ftrace_tracing_max_latency.sh | 38 +++ > > .../ftrace_stress/ftrace_tracing_on.sh | 39 ++++ > > .../ftrace_stress_test/ftrace_stress_test.sh | 237 ++++++++++++++++++++ > > 23 files changed, 931 insertions(+), 2 deletions(-) > > create mode 100644 runtest/tracing > > create mode 100644 testcases/kernel/tracing/Makefile > > create mode 100644 testcases/kernel/tracing/ftrace_stress_test/Makefile > > create mode 100644 testcases/kernel/tracing/ftrace_stress_test/ftrace_get_page_size.c > > create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_buffer_size.sh > > create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_current_tracer.sh > > create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_ftrace_enabled.sh > > create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_profile_enabled.sh > > create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_set_event.sh > > create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_set_ftrace_pid.sh > > create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_stack_max_size.sh > > create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_stack_trace.sh > > create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace.sh > > create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_clock.sh > > create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_options.sh > > create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_pipe.sh > > create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_stat.sh > > create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_enabled.sh > > create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_max_latency.sh > > create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_on.sh > > create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress_test.sh > > > > diff --git a/runltp b/runltp > > index b385984..89b1717 100755 > > --- a/runltp > > +++ b/runltp > > @@ -593,7 +593,8 @@ main() > > ${LTPROOT}/runtest/numa \ > > ${LTPROOT}/runtest/hugetlb \ > > ${LTPROOT}/runtest/commands \ > > - ${LTPROOT}/runtest/hyperthreading > > + ${LTPROOT}/runtest/hyperthreading \ > > + ${LTPROOT}/runtest/tracing > > do > > [ -e "$SCENFILES" ] || \ > > { > > diff --git a/runtest/tracing b/runtest/tracing > > new file mode 100644 > > index 0000000..ef3a048 > > --- /dev/null > > +++ b/runtest/tracing > > @@ -0,0 +1,2 @@ > > +#DESCRIPTION:Tracing testing > > +ftrace-stress-test ftrace_stress_test.sh 90 > > diff --git a/testcases/kernel/Makefile b/testcases/kernel/Makefile > > index e2a9d8e..8c50025 100644 > > --- a/testcases/kernel/Makefile > > +++ b/testcases/kernel/Makefile > > @@ -30,7 +30,7 @@ include $(top_srcdir)/include/mk/env_pre.mk > > ifneq ($(UCLINUX),1) > > SUBDIRS := containers connectors controllers fs hotplug io ipc mem \ > > numa performance_counters power_management pty sched \ > > - security syscalls timers > > + security syscalls timers tracing > > else > > SUBDIRS := syscalls > > endif > > diff --git a/testcases/kernel/tracing/Makefile b/testcases/kernel/tracing/Makefile > > new file mode 100644 > > index 0000000..e9f96c3 > > --- /dev/null > > +++ b/testcases/kernel/tracing/Makefile > > @@ -0,0 +1,5 @@ > > +top_srcdir ?= ../../.. > > + > > +include $(top_srcdir)/include/mk/env_pre.mk > > + > > +include $(top_srcdir)/include/mk/generic_trunk_target.mk > > diff --git a/testcases/kernel/tracing/ftrace_stress_test/Makefile b/testcases/kernel/tracing/ftrace_stress_test/Makefile > > new file mode 100644 > > index 0000000..e4a913a > > --- /dev/null > > +++ b/testcases/kernel/tracing/ftrace_stress_test/Makefile > > @@ -0,0 +1,7 @@ > > +top_srcdir ?= ../../../.. > > + > > +include $(top_srcdir)/include/mk/testcases.mk > > + > > +INSTALL_TARGETS := *.sh ftrace_stress/* > > + > > +include $(top_srcdir)/include/mk/generic_leaf_target.mk > > diff --git a/testcases/kernel/tracing/ftrace_stress_test/ftrace_get_page_size.c b/testcases/kernel/tracing/ftrace_stress_test/ftrace_get_page_size.c > > new file mode 100644 > > index 0000000..b52a109 > > --- /dev/null > > +++ b/testcases/kernel/tracing/ftrace_stress_test/ftrace_get_page_size.c > > @@ -0,0 +1,10 @@ > > +#include > > +#include > > + > > +int main(void) > > +{ > > + printf("%d\n", getpagesize()); > > + > > + return 0; > > +} > > + > > diff --git a/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_buffer_size.sh b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_buffer_size.sh > > new file mode 100755 > > index 0000000..af5a98e > > --- /dev/null > > +++ b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_buffer_size.sh > > @@ -0,0 +1,43 @@ > > +#! /bin/sh > > + > > +############################################################################### > > +# # > > +# Copyright (c) 2010 FUJITSU LIMITED # > > +# # > > +# This program is free software; you can redistribute it and/or modify it # > > +# under the terms of the GNU General Public License as published by the Free # > > +# Software Foundation; either version 2 of the License, or (at your option) # > > +# any later version. # > > +# # > > +# Author: Li Zefan # > > +# # > > +############################################################################### > > + > > +LOOP=200 > > + > > +# Use up to 10% of free memory > > +free_mem=`cat /proc/meminfo | grep '^MemFree' | awk '{ print $2 }'` > > +step=$(( $free_mem / 10 / $LOOP )) > > +if [ $step -eq 0 ]; then > > + $step=1 > > + LOOP=50 > > +fi > > + > > +for ((; ;)) > > +{ > > + new_size=1 > > + for ((i = 0; i < $LOOP; i++)) > > + { > > + echo $new_size > "$TRACING_PATH"/buffer_size_kb > > + new_size=$(( $new_size + $step )) > > + } > > + > > + for ((i = 0; i < $LOOP; i++)) > > + { > > + new_size=$(( $new_size - $step )) > > + echo $new_size > "$TRACING_PATH"/buffer_size_kb > > + } > > + > > + sleep 1 > > +} > > + > > diff --git a/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_current_tracer.sh b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_current_tracer.sh > > new file mode 100755 > > index 0000000..88d576f > > --- /dev/null > > +++ b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_current_tracer.sh > > @@ -0,0 +1,34 @@ > > +#! /bin/sh > > + > > +############################################################################### > > +# # > > +# Copyright (c) 2010 FUJITSU LIMITED # > > +# # > > +# This program is free software; you can redistribute it and/or modify it # > > +# under the terms of the GNU General Public License as published by the Free # > > +# Software Foundation; either version 2 of the License, or (at your option) # > > +# any later version. # > > +# # > > +# Author: Li Zefan # > > +# # > > +############################################################################### > > + > > +LOOP=200 > > + > > +for ((; ;)) > > +{ > > + for ((i = 0; i < $LOOP; i++)) > > + { > > + for tracer in `cat "$TRACING_PATH"/available_tracers` > > + do > > + if [ "$tracer" = mmiotrace ]; then > > + continue > > + fi > > + > > + echo $tracer > "$TRACING_PATH"/current_tracer 2> /dev/null > > + done > > + } > > + > > + sleep 1 > > +} > > + > > diff --git a/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_ftrace_enabled.sh b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_ftrace_enabled.sh > > new file mode 100755 > > index 0000000..20bb234 > > --- /dev/null > > +++ b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_ftrace_enabled.sh > > @@ -0,0 +1,39 @@ > > +#! /bin/sh > > + > > +############################################################################### > > +# # > > +# Copyright (c) 2010 FUJITSU LIMITED # > > +# # > > +# This program is free software; you can redistribute it and/or modify it # > > +# under the terms of the GNU General Public License as published by the Free # > > +# Software Foundation; either version 2 of the License, or (at your option) # > > +# any later version. # > > +# # > > +# Author: Li Zefan # > > +# # > > +############################################################################### > > + > > +MAX_LOOP=1500 > > +count=0 > > + > > +for ((; ;)) > > +{ > > + count=$(( $count + 1 )) > > + > > + for ((i = 0; i < $MAX_LOOP; i++)) > > + { > > + echo 0 > /proc/sys/kernel/ftrace_enabled > > + echo 1 > /proc/sys/kernel/ftrace_enabled > > + } > > + > > + enable=$(( $count % 3 )) > > + > > + if [ $enable -eq 0 ]; then > > + echo 1 > /proc/sys/kernel/ftrace_enabled > > + else > > + echo 0 > /proc/sys/kernel/ftrace_enabled > > + fi > > + > > + sleep 1 > > +} > > + > > diff --git a/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_profile_enabled.sh b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_profile_enabled.sh > > new file mode 100755 > > index 0000000..9c6162a > > --- /dev/null > > +++ b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_profile_enabled.sh > > @@ -0,0 +1,50 @@ > > +#! /bin/sh > > + > > +############################################################################### > > +# # > > +# Copyright (c) 2010 FUJITSU LIMITED # > > +# # > > +# This program is free software; you can redistribute it and/or modify it # > > +# under the terms of the GNU General Public License as published by the Free # > > +# Software Foundation; either version 2 of the License, or (at your option) # > > +# any later version. # > > +# # > > +# Author: Li Zefan # > > +# # > > +############################################################################### > > + > > +MAX_LOOP=1500 > > +count=0 > > + > > +if [ ! -e "$TRACING_PATH"/function_profile_enabled ]; then > > + should_skip=1 > > +else > > + should_skip=0 > > +fi > > + > > +for ((; ;)) > > +{ > > + if [ $should_skip -eq 1 ]; then > > + sleep 2 > > + continue > > + fi > > + > > + count=$(( $count + 1 )) > > + > > + for ((i = 0; i < $MAX_LOOP; i++)) > > + { > > + echo 0 > "$TRACING_PATH"/function_profile_enabled 2> /dev/null > > + echo 1 > "$TRACING_PATH"/function_profile_enabled 2> /dev/null > > + } > > + > > + enable=$(( $count % 3 )) > > + > > + if [ $enable -eq 0 ]; then > > + echo 1 > "$TRACING_PATH"/function_profile_enabled 2> /dev/null > > + else > > + echo 0 > "$TRACING_PATH"/function_profile_enabled 2> /dev/null > > + fi > > + > > + sleep 1 > > +} > > + > > diff --git a/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_set_event.sh b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_set_event.sh > > new file mode 100755 > > index 0000000..d7efdd4 > > --- /dev/null > > +++ b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_set_event.sh > > @@ -0,0 +1,44 @@ > > +#! /bin/sh > > + > > +############################################################################### > > +# # > > +# Copyright (c) 2010 FUJITSU LIMITED # > > +# # > > +# This program is free software; you can redistribute it and/or modify it # > > +# under the terms of the GNU General Public License as published by the Free # > > +# Software Foundation; either version 2 of the License, or (at your option) # > > +# any later version. # > > +# # > > +# Author: Li Zefan # > > +# # > > +############################################################################### > > + > > +for ((; ;)) > > +{ > > + for ((i = 0; i < 100; i++)) > > + { > > + echo 1 > "$TRACING_PATH"/events/enable > > + echo 0 > "$TRACING_PATH"/events/enable > > + } > > + > > + for dir in `ls $TRACING_PATH/events/` > > + do > > + if [ ! -d $dir -o "$dir" = ftrace ]; then > > + continue; > > + fi > > + > > + for ((i = 0; i < 20; i++)) > > + { > > + echo 1 > "$TRACING_PATH"/events/$dir/enable > > + echo 0 > "$TRACING_PATH"/events/$dir/enable > > + } > > + done > > + > > + for event in `cat $TRACING_PATH/available_events`; > > + do > > + echo $event >> "$TRACING_PATH"/set_event > > + done > > + > > + sleep 1 > > +} > > + > > diff --git a/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_set_ftrace_pid.sh b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_set_ftrace_pid.sh > > new file mode 100755 > > index 0000000..541215c > > --- /dev/null > > +++ b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_set_ftrace_pid.sh > > @@ -0,0 +1,44 @@ > > +#! /bin/sh > > + > > +############################################################################### > > +# # > > +# Copyright (c) 2010 FUJITSU LIMITED # > > +# # > > +# This program is free software; you can redistribute it and/or modify it # > > +# under the terms of the GNU General Public License as published by the Free # > > +# Software Foundation; either version 2 of the License, or (at your option) # > > +# any later version. # > > +# # > > +# Author: Li Zefan # > > +# # > > +############################################################################### > > + > > +LOOP=300 > > + > > +if [ ! -e "$TRACING_PATH"/set_ftrace_pid ]; then > > + should_skip=1 > > +else > > + should_skip=0 > > +fi > > + > > +for ((; ; )) > > +{ > > + if [ $should_skip -eq 1 ]; then > > + sleep 2 > > + continue > > + fi > > + > > + for ((j = 0; j < $LOOP; j++)) > > + { > > + for ((k = 1; k <= NR_PIDS; k++)) > > + { > > + str="\$pid$k" > > + eval echo $str >> "$TRACING_PATH"/set_ftrace_pid > > + } > > + > > + echo > "$TRACING_PATH"/set_ftrace_pid > > + } > > + > > + sleep 1 > > +} > > + > > diff --git a/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_stack_max_size.sh b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_stack_max_size.sh > > new file mode 100755 > > index 0000000..682d05e > > --- /dev/null > > +++ b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_stack_max_size.sh > > @@ -0,0 +1,39 @@ > > +#! /bin/sh > > + > > +############################################################################### > > +# # > > +# Copyright (c) 2010 FUJITSU LIMITED # > > +# # > > +# This program is free software; you can redistribute it and/or modify it # > > +# under the terms of the GNU General Public License as published by the Free # > > +# Software Foundation; either version 2 of the License, or (at your option) # > > +# any later version. # > > +# # > > +# Author: Li Zefan # > > +# # > > +############################################################################### > > + > > +MAX_STACK_SIZE=8192 > > + > > +if [ ! -e /proc/sys/kernel/stack_tracer_enabled ]; then > > + should_skip=1 > > +else > > + should_skip=0 > > +fi > > + > > +for ((; ;)) > > +{ > > + if [ $should_skip -eq 1 ]; then > > + sleep 2 > > + continue > > + fi > > + > > + for ((i = 0; i < $MAX_STACK_SIZE; i += 70)) > > + { > > + echo $i > "$TRACING_PATH"/stack_max_size > > + cat "$TRACING_PATH"/stack_max_size > /dev/null > > + } > > + > > + sleep 1 > > +} > > + > > diff --git a/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_stack_trace.sh b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_stack_trace.sh > > new file mode 100755 > > index 0000000..a406c51 > > --- /dev/null > > +++ b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_stack_trace.sh > > @@ -0,0 +1,46 @@ > > +#! /bin/sh > > + > > +############################################################################### > > +# # > > +# Copyright (c) 2010 FUJITSU LIMITED # > > +# # > > +# This program is free software; you can redistribute it and/or modify it # > > +# under the terms of the GNU General Public License as published by the Free # > > +# Software Foundation; either version 2 of the License, or (at your option) # > > +# any later version. # > > +# # > > +# Author: Li Zefan # > > +# # > > +############################################################################### > > + > > +LOOP=400 > > + > > +if [ ! -e /proc/sys/kernel/stack_tracer_enabled ]; then > > + should_skip=1 > > +else > > + should_skip=0 > > +fi > > + > > +for ((; ;)) > > +{ > > + if [ $should_skip -eq 1 ]; then > > + sleep 2 > > + continue > > + fi > > + > > + for ((i = 0; i < $LOOP; i++)) > > + { > > + cat "$TRACING_PATH"/stack_trace > /dev/null > > + } > > + > > + sleep 1 > > + > > + for ((i = 0; i < $LOOP; i++)) > > + { > > + echo 0 > /proc/sys/kernel/stack_tracer_enabled > > + echo 1 > /proc/sys/kernel/stack_tracer_enabled > > + } > > + > > + sleep 1 > > +} > > + > > diff --git a/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace.sh b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace.sh > > new file mode 100755 > > index 0000000..e36712b > > --- /dev/null > > +++ b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace.sh > > @@ -0,0 +1,27 @@ > > +#! /bin/sh > > + > > +############################################################################### > > +# # > > +# Copyright (c) 2010 FUJITSU LIMITED # > > +# # > > +# This program is free software; you can redistribute it and/or modify it # > > +# under the terms of the GNU General Public License as published by the Free # > > +# Software Foundation; either version 2 of the License, or (at your option) # > > +# any later version. # > > +# # > > +# Author: Li Zefan # > > +# # > > +############################################################################### > > + > > +LOOP=200 > > + > > +for ((; ;)) > > +{ > > + for ((i = 0; i < $LOOP; i++)) > > + { > > + cat "$TRACING_PATH"/trace > /dev/null > > + } > > + > > + sleep 1 > > +} > > + > > diff --git a/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_clock.sh b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_clock.sh > > new file mode 100755 > > index 0000000..de6bbea > > --- /dev/null > > +++ b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_clock.sh > > @@ -0,0 +1,46 @@ > > +#! /bin/sh > > + > > +############################################################################### > > +# # > > +# Copyright (c) 2010 FUJITSU LIMITED # > > +# # > > +# This program is free software; you can redistribute it and/or modify it # > > +# under the terms of the GNU General Public License as published by the Free # > > +# Software Foundation; either version 2 of the License, or (at your option) # > > +# any later version. # > > +# # > > +# Author: Li Zefan # > > +# # > > +############################################################################### > > + > > +LOOP=400 > > + > > +# In kernel which is older than 2.6.32, we set global clock > > +# via trace_options. > > +tst_kvercmp 2 6 32 > > +if [ $? -eq 0 ]; then > > + old_kernel=1 > > +else > > + old_kernel=0 > > +fi > > + > > +for ((; ;)) > > +{ > > + if [ $old_kernel -eq 1 ]; > > + then > > + for ((i = 0; i < $LOOP; i++)) > > + { > > + echo 1 > "$TRACING_PATH"/options/global-clock > > + echo 0 > "$TRACING_PATH"/options/global-clock > > + } > > + else > > + for ((i = 0; i < $LOOP; i++)) > > + { > > + echo local > "$TRACING_PATH"/trace_clock > > + echo global > "$TRACING_PATH"/trace_clock > > + } > > + fi > > + > > + sleep 1 > > +} > > + > > diff --git a/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_options.sh b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_options.sh > > new file mode 100755 > > index 0000000..47d2a62 > > --- /dev/null > > +++ b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_options.sh > > @@ -0,0 +1,42 @@ > > +#! /bin/sh > > + > > +############################################################################### > > +# # > > +# Copyright (c) 2010 FUJITSU LIMITED # > > +# # > > +# This program is free software; you can redistribute it and/or modify it # > > +# under the terms of the GNU General Public License as published by the Free # > > +# Software Foundation; either version 2 of the License, or (at your option) # > > +# any later version. # > > +# # > > +# Author: Li Zefan # > > +# # > > +############################################################################### > > + > > +LOOP=200 > > + > > +trace_options=(print-parent sym-offset sym-addr verbose raw hex bin block trace_printk ftrace_preempt branch annotate userstacktrace sym-userobj printk-msg-only context-info latency-format sleep-time graph-time) > > + > > +NR_TRACE_OPTIONS=19 > > + > > +for ((; ; )) > > +{ > > + for ((j = 0; j < $LOOP; j++)) > > + { > > + num=`date +%N` > > + num=`printf 1%s $num` > > + > > + for ((i = 0; i < $NR_TRACE_OPTIONS; i++)) > > + { > > + n=$(( ( $num >> $i ) % 2 )) > > + if [ $n -eq 0 ]; then > > + echo 0 > "$TRACING_PATH"/options/${trace_options[$i]} > > + else > > + echo 1 > "$TRACING_PATH"/options/${trace_options[$i]} > > + fi > > + } > > + } > > + > > + sleep 1 > > +} > > + > > diff --git a/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_pipe.sh b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_pipe.sh > > new file mode 100755 > > index 0000000..47d42bc > > --- /dev/null > > +++ b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_pipe.sh > > @@ -0,0 +1,52 @@ > > +#! /bin/sh > > + > > +############################################################################### > > +# # > > +# Copyright (c) 2010 FUJITSU LIMITED # > > +# # > > +# This program is free software; you can redistribute it and/or modify it # > > +# under the terms of the GNU General Public License as published by the Free # > > +# Software Foundation; either version 2 of the License, or (at your option) # > > +# any later version. # > > +# # > > +# Author: Li Zefan # > > +# # > > +############################################################################### > > + > > +ftrace_sleep() > > +{ > > + # usleep is not a standard command? > > + usleep 200000 2> /dev/null > > + if [ $? -ne 0 ]; then > > + sleep 1 > > + fi > > +} > > + > > +kill_this_pid() > > +{ > > + /bin/kill -SIGKILL $this_pid > > + wait $this_pid > > + exit 0 > > +} > > + > > +trap kill_this_pid SIGUSR1 > > + > > +LOOP=20 > > + > > +for ((; ;)) > > +{ > > + for ((i = 0; i < $LOOP; i++)) > > + { > > + cat "$TRACING_PATH"/trace_pipe > /dev/null & > > + > > + this_pid=$! > > + ftrace_sleep > > + /bin/kill -SIGINT $this_pid > > + wait $this_pid > > + this_pid=0 > > + ftrace_sleep > > + } > > + > > + sleep 2 > > +} > > + > > diff --git a/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_stat.sh b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_stat.sh > > new file mode 100755 > > index 0000000..cb601db > > --- /dev/null > > +++ b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_stat.sh > > @@ -0,0 +1,45 @@ > > +#! /bin/sh > > + > > +############################################################################### > > +# # > > +# Copyright (c) 2010 FUJITSU LIMITED # > > +# # > > +# This program is free software; you can redistribute it and/or modify it # > > +# under the terms of the GNU General Public License as published by the Free # > > +# Software Foundation; either version 2 of the License, or (at your option) # > > +# any later version. # > > +# # > > +# Author: Li Zefan # > > +# # > > +############################################################################### > > + > > +LOOP=200 > > + > > +should_skip=0 > > + > > +if [ ! -e "$TRACING_PATH"/function_profile_enabled ]; then > > + should_skip=1 > > +fi > > + > > +# For kernels older than 2.6.36, this testcase can result in > > +# divide-by-zero kernel bug > > +tst_kvercmp 2 6 36 > > +if [ $? -eq 0 ]; then > > + should_skip=1 > > +fi > > + > > +for ((; ;)) > > +{ > > + if [ $should_skip -eq 1 ]; then > > + sleep 2 > > + continue > > + fi > > + > > + for ((i = 0; i < $LOOP; i++)) > > + { > > + cat "$TRACING_PATH"/trace_stat/function0 > /dev/null 2>&1 > > + } > > + > > + sleep 1 > > +} > > + > > diff --git a/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_enabled.sh b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_enabled.sh > > new file mode 100755 > > index 0000000..69f2ae6 > > --- /dev/null > > +++ b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_enabled.sh > > @@ -0,0 +1,39 @@ > > +#! /bin/sh > > + > > +############################################################################### > > +# # > > +# Copyright (c) 2010 FUJITSU LIMITED # > > +# # > > +# This program is free software; you can redistribute it and/or modify it # > > +# under the terms of the GNU General Public License as published by the Free # > > +# Software Foundation; either version 2 of the License, or (at your option) # > > +# any later version. # > > +# # > > +# Author: Li Zefan # > > +# # > > +############################################################################### > > + > > +MAX_LOOP=1500 > > +count=0 > > + > > +for ((; ;)) > > +{ > > + count=$(( $count + 1 )) > > + > > + for ((i = 0; i < $MAX_LOOP; i++)) > > + { > > + echo 0 > "$TRACING_PATH"/tracing_enabled > > + echo 1 > "$TRACING_PATH"/tracing_enabled > > + } > > + > > + enable=$(( $count % 3 )) > > + > > + if [ $enable -eq 0 ]; then > > + echo 0 > "$TRACING_PATH"/tracing_enabled > > + else > > + echo 1 > "$TRACING_PATH"/tracing_enabled > > + fi > > + > > + sleep 1 > > +} > > + > > diff --git a/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_max_latency.sh b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_max_latency.sh > > new file mode 100755 > > index 0000000..f19d734 > > --- /dev/null > > +++ b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_max_latency.sh > > @@ -0,0 +1,38 @@ > > +#! /bin/sh > > + > > +############################################################################### > > +# # > > +# Copyright (c) 2010 FUJITSU LIMITED # > > +# # > > +# This program is free software; you can redistribute it and/or modify it # > > +# under the terms of the GNU General Public License as published by the Free # > > +# Software Foundation; either version 2 of the License, or (at your option) # > > +# any later version. # > > +# # > > +# Author: Li Zefan # > > +# # > > +############################################################################### > > + > > +MAX_LATENCY=100000 > > + > > +if [ ! -e "$TRACING_PATH"/tracing_max_latency ]; then > > + should_skip=1 > > +else > > + should_skip=0 > > +fi > > + > > +for ((; ;)) > > +{ > > + if [ $should_skip -eq 1 ]; then > > + sleep 2 > > + continue > > + fi > > + > > + for ((i = 0; i < $MAX_LATENCY; i += 400)) > > + { > > + echo $i > "$TRACING_PATH"/tracing_max_latency > > + } > > + > > + sleep 1 > > +} > > + > > diff --git a/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_on.sh b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_on.sh > > new file mode 100755 > > index 0000000..672c223 > > --- /dev/null > > +++ b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_on.sh > > @@ -0,0 +1,39 @@ > > +#! /bin/sh > > + > > +############################################################################### > > +# # > > +# Copyright (c) 2010 FUJITSU LIMITED # > > +# # > > +# This program is free software; you can redistribute it and/or modify it # > > +# under the terms of the GNU General Public License as published by the Free # > > +# Software Foundation; either version 2 of the License, or (at your option) # > > +# any later version. # > > +# # > > +# Author: Li Zefan # > > +# # > > +############################################################################### > > + > > +MAX_LOOP=1500 > > +count=0 > > + > > +for ((; ;)) > > +{ > > + count=$(( $count + 1 )) > > + > > + for ((i = 0; i < $MAX_LOOP; i++)) > > + { > > + echo 0 > "$TRACING_PATH"/tracing_on > > + echo 1 > "$TRACING_PATH"/tracing_on > > + } > > + > > + enable=$(( $count % 3 )) > > + > > + if [ $enable -eq 0 ]; then > > + echo 0 > "$TRACING_PATH"/tracing_on > > + else > > + echo 1 > "$TRACING_PATH"/tracing_on > > + fi > > + > > + sleep 1 > > +} > > + > > diff --git a/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress_test.sh b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress_test.sh > > new file mode 100755 > > index 0000000..874268e > > --- /dev/null > > +++ b/testcases/kernel/tracing/ftrace_stress_test/ftrace_stress_test.sh > > @@ -0,0 +1,237 @@ > > +#! /bin/sh > > + > > +################################################################################ > > +## ## > > +## Copyright (c) 2010 FUJITSU LIMITED ## > > +## ## > > +## This program is free software; you can redistribute it and#or modify ## > > +## it under the terms of the GNU General Public License as published by ## > > +## the Free Software Foundation; either version 2 of the License, or ## > > +## (at your option) any later version. ## > > +## ## > > +## This program is distributed in the hope that it will be useful, but ## > > +## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ## > > +## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ## > > +## for more details. ## > > +## ## > > +## You should have received a copy of the GNU General Public License ## > > +## along with this program; if not, write to the Free Software ## > > +## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ## > > +## ## > > +## Author: Li Zefan ## > > +## ## > > +################################################################################ > > + > > +cd $LTPROOT/testcases/bin > > + > > +export TCID="ftrace-stress-test" > > +export TST_TOTAL=1 > > +export TST_COUNT=1 > > + > > +export TPATH="$PWD" > > +export DEBUGFS_PATH="$PWD/debugfs" > > +export TRACING_PATH="$PWD/debugfs/tracing" > > +export SPATH="$TPATH/ftrace_stress" > > + > > +test_interval=$1 > > + > > +save_old_setting() > > +{ > > + cd $TRACING_PATH > > + > > + old_trace_options=( `cat trace_options` ) > > + old_tracing_on=`cat tracing_on` > > + old_tracing_enabled=`cat tracing_enabled` > > + old_buffer_size=`cat buffer_size_kb` > > + > > + if [ -e stack_max_size ]; then > > + old_stack_tracer_enabled=`cat /proc/sys/kernel/stack_tracer_enabled` > > + fi > > + > > + if [ -e "/proc/sys/kernel/ftrace_enabled" ]; then > > + old_ftrace_enabled=`cat /proc/sys/kernel/ftrace_enabled` > > + fi > > + > > + if [ -e "function_profile_enabled" ]; then > > + old_profile_enabled=`cat function_profile_enabled` > > + fi > > + > > + cd - > /dev/null > > +} > > + > > +restore_old_setting() > > +{ > > + cd $TRACING_PATH > > + > > + echo nop > current_tracer > > + echo 0 > events/enable > > + echo 0 > tracing_max_latency 2> /dev/null > > + > > + if [ -e trace_clock ]; then > > + echo local > trace_clock > > + fi > > + > > + if [ -e "function_pofile_enabled" ]; then > > + echo $old_profile_enabled > function_profile_enabled > > + fi > > + > > + if [ -e "/proc/sys/kernel/ftrace_enabled" ]; then > > + echo $old_ftrace_enabled > /proc/sys/kernel/ftrace_enabled > > + fi > > + > > + if [ -e stack_max_size ]; then > > + echo $old_stack_tracer_enabled > /proc/sys/kernel/stack_tracer_enabled > > + echo 0 > stack_max_size > > + fi > > + > > + echo $old_buffer_size > buffer_size_kb > > + echo $old_tracing_on > tracing_on > > + echo $old_tracing_enabled > tracing_enabled > > + > > + for option in $old_trace_options > > + do > > + echo $option > trace_options 2> /dev/null > > + done > > + > > + echo > trace > > + > > + cd - > /dev/null > > +} > > + > > +clean_up() > > +{ > > + kill -KILL $pid1 > > + kill -KILL $pid2 > > + kill -KILL $pid3 > > + kill -KILL $pid4 > > + kill -KILL $pid5 > > + kill -KILL $pid6 > > + kill -KILL $pid7 > > + kill -KILL $pid8 > > + kill -KILL $pid9 > > + kill -KILL $pid10 > > + kill -KILL $pid11 > > + kill -USR1 $pid12 > > + kill -KILL $pid13 > > + kill -KILL $pid14 > > + kill -KILL $pid15 > > + kill -KILL $pid16 > > + > > + sleep 2 > > + restore_old_setting > > + > > + umount $DEBUGFS_PATH > > + rmdir $DEBUGFS_PATH > > +} > > + > > +clean_up_exit() > > +{ > > + clean_up > > + exit 1 > > +} > > + > > +export_pids() > > +{ > > + export pid1 pid2 pid3 pid4 pid5 pid6 pid7 pid8 pid9 pid10 pid11 pid12 \ > > + pid13 pid14 pid15 pid16 > > + > > + export NR_PIDS=16 > > +} > > + > > +test_begin() > > +{ > > + start_time=`date +%s` > > +} > > + > > +test_wait() > > +{ > > + for ((; ;)) > > + { > > + sleep 2 > > + > > + cur_time=`date +%s` > > + elapsed=$(( $cur_time - $start_time )) > > + > > + # run the stress test for $test_interval secs > > + if [ $elapsed -ge $test_interval ]; then > > + break > > + fi > > + } > > +} > > + > > +trap clean_up_exit SIGINT > > + > > +# Should be run by root user > > +if [ `id -ru` != 0 ]; then > > + tst_brkm TCONF ignored "The test should be run by root user. Skip the test..." > > + exit 0 > > +fi > > + > > +# Don't run the test on kernels older than 2.6.34, otherwise > > +# it can crash the system if the kernel is not latest-stable > > +tst_kvercmp 2 6 34 > > +if [ $? -eq 0 ]; then > > + tst_brkm TCONF ignored "The test should be run in kernels >= 2.6.34. Skip the test..." > > + exit 0 > > +fi > > + > > +mkdir $DEBUGFS_PATH > > +mount -t debugfs xxx $DEBUGFS_PATH > > + > > +# Check to see tracing feature is supported or not > > +if [ ! -d $TRACING_PATH ]; then > > + tst_brkm TCONF ignored "Tracing is not supported. Skip the test..." > > + umount $DEBUGFS_PATH > > + rmdir $DEBUGFS_PATH > > + exit 0 > > +fi > > + > > +echo "Ftrace Stress Test Begin" > > + > > +save_old_setting > > + > > +test_begin > > + > > +$SPATH/ftrace_trace_clock.sh & > > +pid1=$! > > +$SPATH/ftrace_current_tracer.sh & > > +pid2=$! > > +$SPATH/ftrace_trace_options.sh & > > +pid3=$! > > +$SPATH/ftrace_tracing_max_latency.sh & > > +pid4=$! > > +$SPATH/ftrace_stack_trace.sh & > > +pid5=$! > > +$SPATH/ftrace_stack_max_size.sh & > > +pid6=$! > > +$SPATH/ftrace_tracing_on.sh & > > +pid7=$! > > +$SPATH/ftrace_tracing_enabled.sh & > > +pid8=$! > > +$SPATH/ftrace_set_event.sh & > > +pid9=$! > > +$SPATH/ftrace_buffer_size.sh & > > +pid10=$! > > +$SPATH/ftrace_trace.sh & > > +pid11=$! > > +$SPATH/ftrace_trace_pipe.sh & > > +pid12=$! > > +$SPATH/ftrace_ftrace_enabled.sh & > > +pid13=$! > > +$SPATH/ftrace_set_ftrace_pid.sh & > > +pid14=$! > > +$SPATH/ftrace_profile_enabled.sh & > > +pid15=$! > > +$SPATH/ftrace_trace_stat.sh & > > +pid16=$! > > + > > +export_pids > > + > > +test_wait > > + > > +clean_up > > + > > +echo "Ftrace Stress Test End" > > + > > +tst_resm TPASS "finished running the test. Run dmesg to double-check for bugs" > > + > > -- > > 1.6.3 > > > > ------------------------------------------------------------------------------ > > This SF.net Dev2Dev email is sponsored by: > > > > Show off your parallel programming skills. > > Enter the Intel(R) Threading Challenge 2010. > > http://p.sf.net/sfu/intel-thread-sfd > > _______________________________________________ > > Ltp-list mailing list > > Ltp-list@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/ltp-list > ------------------------------------------------------------------------------ > Start uncovering the many advantages of virtual appliances > and start using them to simplify application deployment and > accelerate your shift to cloud computing. > http://p.sf.net/sfu/novell-sfdev2dev > _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ------------------------------------------------------------------------------ Virtualization is moving to the mainstream and overtaking non-virtualized environment for deploying applications. Does it make network security easier or more difficult to achieve? Read this whitepaper to separate the two and get a better understanding. http://p.sf.net/sfu/hp-phase2-d2d _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list