From: Thara Gopinath Subject: [PATCH v2 13/14] OMAP3: Add voltage dependency table for VDD1. Date: Fri, 29 Oct 2010 21:08:27 +0530 Message-ID: <1288366708-32302-14-git-send-email-thara@ti.com> References: <1288366708-32302-1-git-send-email-thara@ti.com> Return-path: Received: from bear.ext.ti.com ([192.94.94.41]:34629 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932704Ab0J2Pip (ORCPT ); Fri, 29 Oct 2010 11:38:45 -0400 In-Reply-To: <1288366708-32302-1-git-send-email-thara@ti.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-omap@vger.kernel.org Cc: paul@pwsan.com, khilman@deeprootsystems.com, b-cousson@ti.com, vishwanath.bs@ti.com, sawant@ti.com, Thara Gopinath In OMAP3, for perfomrance reasons when VDD1 is at voltage above 1.075V, VDD2 should be at 1.15V for perfomrance reasons. This patch introduce this cross VDD dependency for OMAP3 VDD1. Signed-off-by: Thara Gopinath --- arch/arm/mach-omap2/voltage.c | 19 +++++++++++++++++++ 1 files changed, 19 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 6f85f75..241fac5 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -350,6 +350,23 @@ static struct omap_volt_data omap44xx_vdd_core_volt_data[] = { {.volt_nominal = 1100000, .sr_errminlimit = 0xF9, .vp_errgain = 0x16}, }; +/* OMAP 3430 MPU Core VDD dependency table */ +static struct omap_vdd_dep_volt omap34xx_vdd1_vdd2_data[] = { + {.main_vdd_volt = 975000, .dep_vdd_volt = 1050000}, + {.main_vdd_volt = 1075000, .dep_vdd_volt = 1050000}, + {.main_vdd_volt = 1200000, .dep_vdd_volt = 1150000}, + {.main_vdd_volt = 1270000, .dep_vdd_volt = 1150000}, + {.main_vdd_volt = 1350000, .dep_vdd_volt = 1150000}, + {.main_vdd_volt = 0, .dep_vdd_volt = 0}, +}; + +static struct omap_vdd_dep_info omap34xx_vdd1_dep_info[] = { + { + .name = "core", + .dep_table = omap34xx_vdd1_vdd2_data, + }, +}; + /* By default VPFORCEUPDATE is the chosen method of voltage scaling */ static bool voltscale_vpforceupdate = true; @@ -574,6 +591,8 @@ static void __init omap3_vdd_data_configure(struct omap_vdd_info *vdd) vdd->volt_data = omap34xx_vdd1_volt_data; vdd->volt_data_count = ARRAY_SIZE(omap34xx_vdd1_volt_data); + vdd->dep_vdd_info = omap34xx_vdd1_dep_info; + vdd->nr_dep_vdd = ARRAY_SIZE(omap34xx_vdd1_dep_info); } vdd->vp_reg.tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK; -- 1.7.0.4